Research Article
Optimization of Process Parameters for Vertical-Faced Polypropylene Bottle Injection Molding
Table 1
Orthogonal test of six factors and five levels.
| Levels | Factors | Melt temperature, A (°C) | Mold temperature, B (°C) | Injection pressure, C (MPa) | Injection time, D (s) | Dwell pressure, E (MPa) | Dwell time, F (s) |
| 1 | 200 | 20 | 30 | 1.3 | 28 | 20 | 2 | 220 | 35 | 35 | 1.5 | 32 | 25 | 3 | 240 | 50 | 40 | 1.7 | 36 | 30 | 4 | 260 | 65 | 45 | 1.9 | 40 | 35 | 5 | 280 | 80 | 50 | 2.1 | 44 | 40 |
|
|