Research Article
Optimization of Process Parameters for Vertical-Faced Polypropylene Bottle Injection Molding
Table 5
The range analysis of the residual stress in cavity in the first direction by various process parameters.
| | A | B | C | D | E | F |
| k1 = K1/5 | 50.030 | 46.952 | 47.080 | 46.690 | 43.938 | 46.908 | k2 = K2/5 | 48.326 | 46.352 | 46.232 | 48.380 | 44.516 | 47.115 | k3 = K3/5 | 47.866 | 46.424 | 47.200 | 46.824 | 45.880 | 47.913 | k4 = K4/5 | 46.076 | 47.356 | 47.486 | 46.958 | 48.490 | 46.308 | k5 = K5/5 | 42.490 | 47.704 | 46.790 | 45.936 | 51.964 | 46.384 | R | 7.540 | 1.352 | 1.254 | 2.444 | 8.026 | 1.605 | Order | 2 | 5 | 6 | 3 | 1 | 4 |
|
|