Research Article
Optimization of Process Parameters for Vertical-Faced Polypropylene Bottle Injection Molding
Table 6
The range analysis of the residual stress in cavity in the second direction by various process parameters.
| | A | B | C | D | E | F |
| k1 = K1/5 | 64.984 | 55.114 | 64.744 | 64.482 | 61.970 | 68.978 | k2 = K2/5 | 65.946 | 61.462 | 62.612 | 63.916 | 60.804 | 61.955 | k3 = K3/5 | 66.974 | 64.004 | 65.504 | 62.556 | 62.148 | 64.097 | k4 = K4/5 | 62.204 | 68.396 | 61.894 | 65.824 | 64.782 | 61.942 | k5 = K5/5 | 59.094 | 70.226 | 64.448 | 62.424 | 69.498 | 61.802 | R | 7.880 | 15.112 | 3.610 | 3.400 | 8.694 | 7.176 | Order | 3 | 1 | 5 | 6 | 2 | 4 |
|
|