Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2018, Article ID 2680121, 8 pages
https://doi.org/10.1155/2018/2680121
Research Article

Biological Resistance and Application Properties of Particleboards Containing Nano-Zinc Oxide

Faculty of Wood Sciences and Technology, Technical University in Zvolen, T. G. Masaryka 24, 960 53 Zvolen, Slovakia

Correspondence should be addressed to Ladislav Reinprecht; ks.ovzut@thcerpnier

Received 18 January 2018; Revised 27 March 2018; Accepted 4 April 2018; Published 22 April 2018

Academic Editor: Mikhael Bechelany

Copyright © 2018 Ladislav Reinprecht et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. Y. Imamura, “Estimation of the fungal resistance of wood composites for structural use,” in Recent Research on Wood and Wood-Based Materials-Current Japanese Materials Research, N. Shiraishi, H. Kajita, and M. Norimoto, Eds., vol. 11, pp. 75–84, Elsevier, London, 2013. View at Google Scholar
  2. L. Reinprecht and V. Štefka, “Drevotrieskové dosky pojené močovinoformaldehydovým a fenolformaldehydovým lepidlom s prídavkom fungicídov,” in Proceedings of the Pokroky vo výrobe a použití lepidiel v drevopriemysle (9th Symposium), pp. 227–238, Chemko Strážske, Czechoslovakia, 1989.
  3. A. Stangierska, J. Zabielska-Matejuk, and I. Frąckowiak, “The assessment of the resistance of particleboard protected with ionic liquids to Basidiomycetes and mould fungi,” Annals of Warsaw University of Life Sciences–SGGW, Forestry and Wood Technology, vol. 84, pp. 190–193, 2013. View at Google Scholar
  4. A. N. Papadopoulos, “Mechanical properties and decay resistance of hornbeam cement bonded particleboards,” Research Letters in Materials Science, vol. 2008, Article ID 379749, 4 pages, 2008. View at Publisher · View at Google Scholar · View at Scopus
  5. T. C. Chiang, S. Hamdan, and M. S. Osman, “Urea formaldehyde composites reinforced with sago fibres analysis by FTIR, TGA, and DSC,” Advances in Materials Science and Engineering, vol. 2016, Article ID 5954636, 10 pages, 2016. View at Publisher · View at Google Scholar · View at Scopus
  6. M. J. Saad and I. Kamal, “Mechanical and physical properties of low density kenaf core particleboards bonded with different resins,” Journal of Science and Technology, vol. 4, no. 1, pp. 17–32, 2012. View at Google Scholar
  7. H. R. Taghiyari and O. F. Bibalan, “Effects of copper nanoparticles on permeability, physical and mechanical properties of particleboard,” European Journal of Wood and Wood Products, vol. 71, pp. 69–77, 2013. View at Publisher · View at Google Scholar · View at Scopus
  8. C. C. Tay, S. Hamdan, and M. S. B. Osman, “Properties of sago particleboards resinated with UF and PF resin,” Advances in Materials Science and Engineering, vol. 2016, Article ID 5323890, 12 pages, 2016. View at Publisher · View at Google Scholar · View at Scopus
  9. European Committee for Standardization, EN 335: Durability of Wood and Wood-Based Products–Use Classes: Definitions, Application to Solid Wood and Wood-Based Products, European Committee for Standardization, Brussels, Belgium, 2013.
  10. T. Godish, Indoor Environmental Quality, Lewis Publisher, CRC Press LLC, Boca Raton, Florida, USA, 2001.
  11. J. W. Kirkpatrick and H. M. Barnes, “Biocide treatments for wood composites–a review,” in Proceedings of the Paper prepared for the 37th Annual Meeting, IRG/WP 06–40323, pp. 1–21, Tromso, Norway, 2006.
  12. H. M. Barnes, “Durable composites: an overview,” Processing of American Wood Protection Association, vol. 107, pp. 267–279, 2012. View at Google Scholar
  13. J. Ważny and A. Kundzewicz, “Conditions and possibilities of nanobiocides formulation for wood protection,” Drewno–Wood, vol. 51, no. 180, pp. 107–115, 2008. View at Google Scholar
  14. W. R. Smith and Q. Wu, “Durability improvement for structural wood composites through chemical treatment,” Forest Products Journal, vol. 55, no. 2, pp. 8–17, 2005. View at Google Scholar
  15. European Committee for Standardization, EN 350: Durability of Wood and Wood-Based Products-Testing and Classification of the Durability to Biological Agents of Wood and Wood-Based Materials, European Committee for Standardization, Brussels, Belgium, 2016.
  16. Z. Vidholdová, J. Iždinský, L. Reinprecht, and J. Krokošová, “Activity of bacteria and moulds on surfaces of commercial wooden composites,” Materials Science Forum, vol. 818, pp. 190–193, 2015. View at Publisher · View at Google Scholar · View at Scopus
  17. W. D. Hanraman, L. J. Parlano, and I. W. Ong, Antimicrobial melamine resin and products made therefrom, 2006.
  18. E. Nosáľ and L. Reinprecht, “Anti-bacterial and anti-mold efficiency of ZnO nanoparticles present in melamine-laminated surfaces of particleboards,” BioResources, vol. 12, no. 4, pp. 7255–7267, 2017. View at Google Scholar
  19. J. Iždinský, L. Reinprecht, E. Nosáľ, Z. Vidholdová, and J. Krokošová, “The activity of bacteria on surfaces of wooden composites painted with acrylate coating with addition of silver nanoparticles,” in Proceedings of the Wood Modification Research and Applications, (ModWoodLife) COST FP 1407 Conference, pp. 130-131, Kuchl, Salzburg, Austria, September 2017.
  20. R. J. Murphy, “Vapour phase treatments for wood products,” in Wood Preservation in 90th and Beyond, Proceedings no. 7308, pp. 83–88, Forest Product Society, Madison, WI, USA, 1994. View at Google Scholar
  21. J. J. Morrell, M. N. Acda, and A. R. Zahora, “Performance of oriented strandboard, medium density fiberboard, plywood, and particleboard treated with tebuconazole in supercritical carbon dioxide,” IRG/WP 05–30364, Bangalore, India, 2005. View at Google Scholar
  22. L. Reinprecht, Z. Vidholdová, and J. Iždinský, “Particleboards prepared with addition of copper sulphate–part 1: biological resistance,” Acta Facultatis Xylologiae Zvolen, vol. 59, no. 2, pp. 53–60, 2017. View at Google Scholar
  23. L. Reinprecht and J. Perlác, “Properties of particleboards protected by TBTN and TCMTB fungicides,” in Proceedings of the Wood modification ‘95 (10th Symposium), pp. 255–264, Poznaň, Poland, 1995.
  24. P. Marzbani, Y. M. Afrouzi, and A. Omidvar, “The effect of nano-zinc oxide on particleboard decay resistance,” Maderas: Ciencia y tecnología, vol. 17, no. 1, pp. 63–68, 2015. View at Google Scholar
  25. European Committee for Standardization, EN 460: Durability of Wood and Wood-Based Products. Natural Durability of Solid Wood. Guide to the Durability Requirements for Wood to be Used in Hazard Classes, European Committee for Standardization, Brussels, Belgium, 1994.
  26. European Chemicals Agency, ECHA: Transitional Guidance on the Biocidal Products Regulation-Transitional Guidance on Efficacy Assessment for Product Type 8 Wood Preservatives, European Chemicals Agency, Helsinki, Finland, 2015.
  27. European Chemicals Agency, ECHA: Practical Guide on Biocidal Products Regulation, European Chemicals Agency, Helsinki, Finland, 2016.
  28. L. S. Mende and J. MacManus-Driscoll, “ZnO nanostructures, defects, and devices,” Materials Today, vol. 10, no. 5, pp. 40–48, 2007. View at Google Scholar
  29. L. E. Shi, Z. H. Li, W. Zheng, Y. F. Zhao, Y. F. Jin, and Z. X. Tang, “Synthesis, antibacterial activity, antibacterial mechanism and food applications of ZnO nanoparticles: a review,” Food Additives and Contaminants Part A, Chemistry, Analysis, Control, Exposure and Risk Assessment, vol. 31, no. 2, pp. 173–186, 2014. View at Publisher · View at Google Scholar · View at Scopus
  30. A. Sirelkhatim, S. Mahmud, A. Seeni et al., “Review on zinc oxide nanoparticles: antibacterial activity and toxicity mechanism,” Nano-Micro Letters, vol. 7, no. 3, pp. 219–242, 2015. View at Publisher · View at Google Scholar · View at Scopus
  31. J. T. Seil and T. J. Webster, “Antimicrobial applications of nanotechnology: methods and literature,” International Journal of Nanomedicine, vol. 7, pp. 2767–2781, 2012. View at Google Scholar
  32. K. R. Raghupathi, R. T. Koodali, and J. T. Manna, “Size-dependent bacterial growth inhibition and mechanism of antibacterial activity of zinc oxide nanoparticles,” Langmuir, vol. 27, no. 7, pp. 4020–4028, 2011. View at Publisher · View at Google Scholar · View at Scopus
  33. C. Wang, L. L. Liu, A. T. Zhang, P. Xie, J. J. Lu, and X. T. Zou, “Antibacterial effects of zinc oxide nanoparticles on Escherichia coli K88,” African Journal of Biotechnology, vol. 11, no. 44, pp. 10248–10254, 2012. View at Google Scholar
  34. S. Ghosh, R. G. Sankar, and V. Vandana, “Curious case of bactericidal action of ZnO,” Journal of Nanoscience, vol. 2014, Article ID 343467, 8 pages, 2014. View at Publisher · View at Google Scholar
  35. A. Stanković, M. Sezen, M. Milenković, S. Kaišarević, N. Andrić, and M. Stevanović, “PLGA/nano-ZnO composite particles for use in biomedical applications: preparation, characterization, and antimicrobial activity,” Journal of Nanomaterials, vol. 2016, Article ID 9425289, 10 pages, 2016. View at Publisher · View at Google Scholar · View at Scopus
  36. A. Rezazadeh, M. R. M. Farahani, Y. M. Afrouzi, and A. A. D. Khalaji, “Investigation on rot resistance of Populus deltoides wood treated with nano-zinc oxide,” World of Science Journal, vol. 2, no. 2, pp. 19–28, 2014. View at Google Scholar
  37. M. R. M. Farahani and F. Banikarim, “Effect of nano-zinc oxide on decay resistance of wood-plastic composites,” BioResources, vol. 8, no. 4, pp. 5715–5720, 2013. View at Publisher · View at Google Scholar
  38. G. Mantanis, E. Terzi, S. N. Kartal, and A. N. Papadopoulos, “Evaluation of mold, decay and termite resistance of pine wood treated with zinc- and copper-based nanocompounds,” International Biodeterioration and Biodegradation, vol. 90, pp. 140–144, 2014. View at Publisher · View at Google Scholar · View at Scopus
  39. N. Bellotti, R. Romagnoli, C. Quintero, C. Domínguez-Wong, F. Ruiz, and C. Deyá, “Nanoparticles as antifungal additives for indoor water borne paints,” Progress in Organic Coatings, vol. 86, pp. 33–40, 2015. View at Publisher · View at Google Scholar · View at Scopus
  40. L. Reinprecht, Z. Vidholdová, and M. Kožienka, “Inhibícia hniloby lipového dreva nanočasticami oxidu zinočnatého v kombinácii s akrylátom,” Acta Facultatis Xylologiae Zvolen, vol. 57, no. 1, pp. 43–52, 2015. View at Google Scholar
  41. L. Reinprecht and Z. Vidholdová, “Growth inhibition of moulds on wood surfaces in presence of nano-zinc oxide and its combinations with polyacrylate and essential oils,” Wood Research, vol. 62, no. 1, pp. 37–44, 2017. View at Google Scholar
  42. J. Iždinský, V. Tóth, and J. Kúdela, “Polyethylene terephthalate recycling in particle board production,” in Wood the Best Material for Mankind, pp. 93–97, Arbora, Zvolen, Slovakia, 2013. View at Google Scholar
  43. European Committee for Standardization, EN 84: Wood Preservatives. Accelerated Ageing of Treated Wood prior to Biological Testing. Leaching Procedure, European Committee for Standardization, Brussels, Belgium, 1997.
  44. European Committee for Standardization, EN 15457: Paints and Varnishes-Laboratory Method for Testing the Efficacy of Film Preservatives in a Coating against Fungi, European Committee for Standardization, Brussels, Belgium, 2014.
  45. European Committee for Standardization, ENV 12038: Durability of Wood and Wood-Based Products-Wood-Based Panels-Method of Test for Determining the Resistance against Wood-Destroying Basidiomycetes, European Committee for Standardization, Brussels, Belgium, 2002.
  46. European Committee for Standardization, EN 317: Particleboards and Fibreboards: Determination of Swelling in Thickness after Immersion in Water, European Committee for Standardization, Brussels, Belgium, 1993.
  47. European Committee for Standardization, EN 319: Particleboards and Fibreboards: Determination of Tensile Strength Perpendicular to the Plane of the Board, European Committee for Standardization, Brussels, Belgium, 1993.
  48. European Committee for Standardization, EN 310: Wood-Based Panels: Determination of Modulus of Elasticity in Bending and of Bending Strength, European Committee for Standardization, Brussels, Belgium, 1993.
  49. W. Y. Chung, S. G. Wi, H. J. Bae, and B. D. Park, “Microscopic observation of wood-based composites exposed to fungal deterioration,” Journal of Wood Science, vol. 45, pp. 64–68, 1999. View at Publisher · View at Google Scholar
  50. F. Green and C. A. Clausen, “Copper tolerance of brown rot fungi: oxalic acid production in southern pine treated with arsenic-free preservatives,” International Biodeterioration & Biodegradation, vol. 56, pp. 75–79, 2005. View at Publisher · View at Google Scholar · View at Scopus
  51. C. Tascioglu, K. Umemura, T. Yoshimura, and K. Tsunoda, “Biological performance of zinc borate-incorporated particleboard: effects of leaching on efficacy,” Composites: Part B, vol. 57, pp. 31–34, 2014. View at Publisher · View at Google Scholar · View at Scopus
  52. C. Tascioglu, K. Umemura, S. S. Kusuma, and T. Yoshimura, “Potential utilization of sodium fluoride (NaF) as a biocide in particleboard production,” Journal of Wood Science, vol. 63, no. 6, pp. 652–657, 2017. View at Publisher · View at Google Scholar · View at Scopus
  53. A. Bayatkashkoli, B. Kameshki, S. Ravan, and M. Shamsian, “Comparing of performance of treated particleboard with alkaline copper quat, boron-fluorine-chromium-arsenic and chlorotalonil against Microcerotermes diversus and Anacanthotermes vagans termite,” International Biodeterioration & Biodegradation, vol. 120, pp. 186–191, 2017. View at Publisher · View at Google Scholar · View at Scopus
  54. S. Sen, N. Ayrilmis, and Z. Candan, “Fungicide and insecticide properties of cardboard panels made from used beverage carton with veneer overlay,” African Journal of Agricultural Research, vol. 5, no. 2, pp. 159–165, 2010. View at Google Scholar
  55. P. D. Evans, V. Lube, H. Averdunk et al., “Visualizing the microdistribution of zinc borate in oriented strand board using X-ray microcomputed tomography and SEM-EDX,” Journal of Composites, vol. 2015, Article ID 630905, 9 pages, 2015. View at Publisher · View at Google Scholar
  56. L. He, Y. Liu, A. Mustapha, and M. Lin, “Antifungal activity of zinc oxide nanoparticles against Botrytis cinerea and Penicillium expansum,” Microbiological Research, vol. 166, no. 3, pp. 207–215, 2011. View at Publisher · View at Google Scholar · View at Scopus
  57. F. J. Alvarez-Peral, O. Zaragoza, Y. Pedreno, and J. C. Argüelles, “Protective role of trehalose during severe oxidative stress caused by hydrogen peroxide and the adaptive oxidative stress response in Candida albicans,” Microbiology, vol. 148, no. 8, pp. 2599–2606, 2002. View at Publisher · View at Google Scholar · View at Scopus
  58. K.-J. Kim, W. S. Sung, B. K. Suh et al., “Antifungal activity and mode of action of silver nano-particles on Candida albicans,” Biometals, vol. 22, no. 2, pp. 235–242, 2009. View at Publisher · View at Google Scholar · View at Scopus
  59. J. Iždinský and L. Reinprecht, “Particleboards prepared with addition of copper sulphate–part 2: moisture and strength properties,” Acta Facultatis Xylologiae Zvolen, vol. 59, no. 2, pp. 61–66, 2017. View at Google Scholar
  60. J. M. Guerreiro-Tanomaru, A. Trindade-Junior, B. C. Costa et al., “Effect of zirconium oxide and zinc oxide nanoparticles on physicochemical properties and antibiofilm activity of a calcium silicate-based material,” Scientific World Journal, vol. 2014, Article ID 975213, 6 pages, 2014. View at Publisher · View at Google Scholar · View at Scopus
  61. H. Rangavar and M. S. F. Hoseiny, “The effect of nanocopper additions in a urea-formaldehyde adhesive on the physical and mechanical properties of particleboard manufactured from date palm waste,” Mechanics of Composite Materials, vol. 51, pp. 119–126, 2015. View at Publisher · View at Google Scholar · View at Scopus
  62. W. Yingprasert, N. Matan, P. Chaowana, and N. Matan, “Fungal resistance and physico-mechanical properties of cinnamon oil- and clove oil-treated rubber-wood particleboards,” Journal of Tropical Forest Science, vol. 27, no. 1, pp. 69–79, 2015. View at Google Scholar
  63. A. Pizzi, “Wood products and green chemistry,” Annals of Forest Science, vol. 73, no. 1, pp. 185–203, 2016. View at Publisher · View at Google Scholar · View at Scopus