Research Article
Fabrication of ABS/Graphene Oxide Composite Filament for Fused Filament Fabrication (FFF) 3D Printing
Table 1
Parameters used for the FFF 3D printing of ABS and ABS/GO composites.
| Parameters | Value |
| Print nozzle diameter (mm) | 0.4 | Nozzle temperature (°C) | 220 | Bed temperature (°C) | 100 | Layer height (mm) | 0.1 | Print infill (%) | 100 | Print speed (mm/s) | 20 |
|
|