Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2018, Article ID 2892361, 6 pages
https://doi.org/10.1155/2018/2892361
Research Article

Forming Mechanism of High-Speed Cold Roll Beating of Spline Tooth

1School of Materials Science and Engineering, Taiyuan University of Science and Technology, Taiyuan 030024, China
2Shanxi Key Laboratory of Metallic Forming Theory and Technology, Taiyuan 030024, China
3School of Mechanical Engineering, Taiyuan University of Science and Technology, Taiyuan 030024, China

Correspondence should be addressed to Zhi-Qi Liu; moc.qq@983830372

Received 29 January 2018; Accepted 20 March 2018; Published 15 April 2018

Academic Editor: Guru P. Dinda

Copyright © 2018 Ting Niu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Ting Niu, Yong-Tang Li, Zhi-Qi Liu, and Hui-Ping Qi, “Forming Mechanism of High-Speed Cold Roll Beating of Spline Tooth,” Advances in Materials Science and Engineering, vol. 2018, Article ID 2892361, 6 pages, 2018. https://doi.org/10.1155/2018/2892361.