Study on Thickness Thinning Ratio of the Forming Parts in Single Point Incremental Forming Process

Table 4

Thickness value.

Thickness number	10 mm	13 mm	15 mm	17 mm	20 mm	Average (mm)
A1	0.5540	0.5447	0.5529	0.5554	0.5434	0.5501
A2	0.5491	0.5390	0.5414	0.5399	0.5433	0.5425
A3	0.5396	0.5350	0.5241	0.5450	0.5424	0.5372
B1	0.5448	0.5409	0.5487	0.5508	0.5438	0.5458
B2	0.5506	0.5389	0.5485	0.5517	0.5550	0.5489
B3	0.5471	0.5530	0.5448	0.5536	0.5487	0.5494
C1	0.5647	0.5388	0.5515	0.5452	0.5482	0.5497
C2	0.5471	0.5530	0.5448	0.5536	0.5487	0.5494
C3	0.5494	0.5471	0.5518	0.5538	0.5469	0.5498
D1	0.5471	0.5530	0.5448	0.5536	0.5487	0.5494
D2	0.4491	0.4420	0.4628	0.4612	0.4562	0.4543
D3	0.3637	0.3365	0.3411	0.3639	0.3583	0.3527
E1	0.4193	0.4061	0.4128	0.4175	0.4134	0.4138
E2	0.5471	0.5530	0.5448	0.5536	0.5487	0.5494
E3	0.6905	0.6804	0.6828	0.6813	0.6847	0.6840