Research Article
Study on Thickness Thinning Ratio of the Forming Parts in Single Point Incremental Forming Process
Table 5
Comparison between the theoretical and experimental results of the average thickness value.
| Process parameters | Tool diameter (mm) | Step down (mm) | Feed speed (mm/min) | Forming angle (°) | Feed speed (mm/min) | 6 | 10 | 14 | 0.6 | 0.8 | 1.0 | 100 | 200 | 300 | 45 | 53 | 60 | 0.62 | 0.81 | 1.08 |
| | 0.630 | 0.616 | 0.616 | 0.607 | 0.622 | 0.616 | 0.606 | 0.616 | 0.603 | 0.616 | 0.492 | 0.381 | 0.458 | 0.616 | 0.845 | | 0.625 | 0.612 | 0.615 | 0.608 | 0.610 | 0.612 | 0.603 | 0.612 | 0.584 | 0.612 | 0.475 | 0.421 | 0.450 | 0.612 | 0.802 | | 0.638 | 0.631 | 0.631 | 0.630 | 0.630 | 0.631 | 0.622 | 0.631 | 0.587 | 0.631 | 0.506 | 0.446 | 0.453 | 0.631 | 0.834 | | 0.79 | 0.65 | 0.16 | 0.16 | 1.92 | 0.65 | 0.49 | 0.65 | 3.15 | 0.65 | 3.46 | 10.50 | 1.70 | 0.65 | 5.09 | | 1.27 | 2.43 | 2.43 | 3.79 | 1.29 | 2.44 | 2.64 | 2.44 | 2.65 | 2.44 | 2.85 | 17.06 | 5.59 | 2.44 | 1.30 |
|
|