Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2018, Article ID 3018761, 10 pages
https://doi.org/10.1155/2018/3018761
Research Article

Enhanced Solubility of the Support in an FDM-Based 3D Printed Structure Using Hydrogen Peroxide under Ultrasonication

1Micro/Nano Scale Manufacturing R&D Group, Korea Institute of Industrial Technology, 143 Hanggaulro, Sangnok-gu, Gyeonggi-do 15588, Republic of Korea
2Department of Mechanical System Design Engineering, Seoul National University of Science and Technology, 232 Gongneung-ro, Nowon-gu, Seoul 01811, Republic of Korea
3Chemical Research Center, Samyang Co., Hwoam-dong, Yuseong-gu, Daejeon 34055, Republic of Korea

Correspondence should be addressed to Yong Son; rk.er.hcetik@gnoynos and Suk-Hee Park; rk.er.hcetik@518emoles

Received 2 November 2017; Revised 17 January 2018; Accepted 31 January 2018; Published 19 March 2018

Academic Editor: Gianluca Percoco

Copyright © 2018 Seong Je Park et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Seong Je Park, Ji Eun Lee, Jean Ho Park, et al., “Enhanced Solubility of the Support in an FDM-Based 3D Printed Structure Using Hydrogen Peroxide under Ultrasonication,” Advances in Materials Science and Engineering, vol. 2018, Article ID 3018761, 10 pages, 2018. https://doi.org/10.1155/2018/3018761.