Enhanced Solubility of the Support in an FDM-Based 3D Printed Structure Using Hydrogen Peroxide under Ultrasonication

<div>Change in (a) tensile strength and (b) weight of direction-varied specimens after H<sub>2</sub>O<sub>2</sub> treatment. In the tensile tests in (a), three specimens were tested in each experiment, and the tensile strength is shown as the mean ± standard deviation.</div>

Advances in Materials Science and Engineering

fig9

Figure 9

Figure 9: Enhanced Solubility of the Support in an FDM-Based 3D Printed Structure Using Hydrogen Peroxide under Ultrasonication 