Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2018, Article ID 3018761, 10 pages
https://doi.org/10.1155/2018/3018761
Research Article

Enhanced Solubility of the Support in an FDM-Based 3D Printed Structure Using Hydrogen Peroxide under Ultrasonication

1Micro/Nano Scale Manufacturing R&D Group, Korea Institute of Industrial Technology, 143 Hanggaulro, Sangnok-gu, Gyeonggi-do 15588, Republic of Korea
2Department of Mechanical System Design Engineering, Seoul National University of Science and Technology, 232 Gongneung-ro, Nowon-gu, Seoul 01811, Republic of Korea
3Chemical Research Center, Samyang Co., Hwoam-dong, Yuseong-gu, Daejeon 34055, Republic of Korea

Correspondence should be addressed to Yong Son; rk.er.hcetik@gnoynos and Suk-Hee Park; rk.er.hcetik@518emoles

Received 2 November 2017; Revised 17 January 2018; Accepted 31 January 2018; Published 19 March 2018

Academic Editor: Gianluca Percoco

Copyright © 2018 Seong Je Park et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. Han, Y. Xiao, T. Qi, Z. Li, and Q. Zeng, “Design and analysis of fused deposition modeling 3D printer nozzle for color mixing,” Advances in Materials Science and Engineering, vol. 2017, Article ID 2095137, 12 pages, 2017. View at Publisher · View at Google Scholar · View at Scopus
  2. Z. Chen, “Research on the impact of 3D printing on the international supply chain,” Advances in Materials Science and Engineering, vol. 2016, Article ID 4173873, 16 pages, 2016. View at Publisher · View at Google Scholar · View at Scopus
  3. C. Park, M. H. Kim, S. M. Hong, J. S. Go, and B. S. Shin, “A study on the comparison mechanical properties of 3D printing prototypes with laminating direction,” Journal of the Korean Society of Manufacturing Technology Engineers, vol. 24, no. 3, pp. 334–341, 2015. View at Publisher · View at Google Scholar
  4. S. J. Park, J. H. Park, K. H. Lee, and M.-Y. Lyu, “Deposition strength of specimens manufactured using fused deposition modeling type 3D printer,” Polymer Korea, vol. 40, no. 6, pp. 846–851, 2016. View at Publisher · View at Google Scholar · View at Scopus
  5. S. J. Park, J. H. Park, M. Y. Lyu, M. S. Koo, H. J. Rho, and S. H. Cho, “Comparison of bulk strength, weldline strength, and deposition strength of 3D printing-manufactured article in fossil PCs and bio-based PCs,” Polymer Korea, vol. 41, no. 3, pp. 531–538, 2017. View at Publisher · View at Google Scholar · View at Scopus
  6. M. Salmi, “Possibilities of preoperative medical models made by 3D printing or additive manufacturing,” Journal of Medical Engineering, vol. 2016, Article ID 6191526, 6 pages, 2016. View at Publisher · View at Google Scholar
  7. T. Srimongkon, S. Mandai, and T. Enomae, “Application of biomaterials and inkjet printing to develop bacterial culture system,” Advances in Materials Science and Engineering, vol. 2015, Article ID 290790, 9 pages, 2015. View at Publisher · View at Google Scholar · View at Scopus
  8. C. Dichtl, P. Sippel, and S. krohns, “Dielectric properties of 3D printed polylactic acid,” Advances in Materials Science and Engineering, vol. 2017, Article ID 6913835, 10 pages, 2017. View at Publisher · View at Google Scholar · View at Scopus
  9. ASTM F2792–12a, Standard Terminology for Additive Manufacturing Technologies, ASTM International, West Conshohocken, PA, USA, 2013.
  10. S. H. Park, B. K. Kang, J. E. Lee et al., “Design and fabrication of a thin-walled free-form scaffold on the basis of medical image data and a 3D printed template: its potential use in bile duct regeneration,” ACS Applied Materials and Interfaces, vol. 9, no. 14, pp. 12290–12298, 2017. View at Publisher · View at Google Scholar · View at Scopus
  11. L. Y. L. Tse, S. Kapila, and K. Barton, “Contoured 3D printing of fiber reinforced polymers,” in Proceedings of the Solid Freeform Fabrication Symposium: An Additive Manufacturing Conference, pp. 1205–1216, Austin, TX, USA, August 2016.
  12. F. Ni, C. Wang, and H. Zhao, “Fabrication of water-soluble poly(vinyl alcohol)-based composites with improved thermal behavior for potential three-dimensional printing application,” Journal of Applied Polymer, vol. 134, no. 24, 2017. View at Publisher · View at Google Scholar · View at Scopus
  13. G. I. Salentijn, P. E. Oomen, M. Grajewski, and E. Verpoorte, “Fused deposition modeling 3D printing for (bio) analytical device fabrication: procedures, materials, and applications,” Analytical Chemistry, vol. 89, no. 13, pp. 7053–7061, 2017. View at Publisher · View at Google Scholar · View at Scopus
  14. C. Duran, V. Subbian, M. T. Giovanetti, J. R. Simkins, and F. R. Beyette Jr., “Experimental desktop 3D printing using dual extrusion and water-soluble polyvinyl alcohol,” Rapid Prototyping Journal, vol. 21, no. 5, 2015. View at Publisher · View at Google Scholar · View at Scopus
  15. C. C. Kuo, Y. C. Tsou, and B. C. Chen, “Enhancing the efficiency of removing support material from rapid prototype parts,” Materialwissenschaft und Werkstofftechnik, vol. 43, no. 3, pp. 234–240, 2012. View at Publisher · View at Google Scholar · View at Scopus
  16. K. Y. Huang, C. T. Wang, W. L. Chou, and C. M. Shu, “Removal of polyvinyl alcohol using photoelectrochemical oxidation processes based on hydrogen peroxide electrogeneration,” International Journal of Photoenergy, vol. 2013, Article ID 841762, 9 pages, 2013. View at Publisher · View at Google Scholar · View at Scopus
  17. L. Lei, X. Hu, P. L. Yue, S. H. Bossmann, S. Gob, and A. M. Braun, “Oxidative degradation of polyvinyl alcohol by the photochemically enhanced fenton reaction,” Journal of Photochemistry and Photobiology A: Chemistry, vol. 116, no. 2, pp. 159–166, 1988. View at Publisher · View at Google Scholar · View at Scopus
  18. Y. Chen, Z. Sun, Y. Yang, and Q. Ke, “Heterogeneous photocatalytic oxidation of polyvinyl alcohol in water,” Journal of Photochemistry and Photobiology A: Chemistry, vol. 142, no. 1, pp. 85–89, 2001. View at Publisher · View at Google Scholar · View at Scopus
  19. H. Li, W. Zhang, W. Xu, and X. Zhang, “Hydrogen bonding governs the elastic properties of poly(vinyl alcohol) in water: single-molecule force spectroscopic studies of PVA by AFM,” Macromolecules, vol. 33, no. 2, pp. 465–469, 2000. View at Publisher · View at Google Scholar · View at Scopus
  20. Z. Amjad, Water Soluble Polymers: Solution Properties and Applications, Springer Science and Business Media, New York, NY, USA, 1998.
  21. Y. Watanabe, M. Morita, N. Hamada, and Y. Tsujisaka, “Formation of hydrogen peroxide by a polyvinyl alcohol degrading enzyme,” Agricultural and Biological Chemistry, vol. 39, no. 12, pp. 2447-2448, 1975. View at Publisher · View at Google Scholar · View at Scopus
  22. S. J. Zhang and H. Q. Yu, “Radiation-induced degradation of polyvinyl alcohol in aqueous solutions,” Water Research, vol. 38, no. 2, pp. 309–316, 2004. View at Publisher · View at Google Scholar · View at Scopus
  23. J. A. Giroto, R. Guardani, A. C. S. C. Teixeira, and C. A. O. Nascimento, “Study on the photo-fenton degradation of polyvinyl alcohol in aqueous solution,” Chemical Engineering and Processing: Process Intensification, vol. 45, no. 7, pp. 523–532, 2006. View at Publisher · View at Google Scholar · View at Scopus
  24. H. W. Maurer, Oxidative degradation of polyvinyl alcohol, 1975.
  25. A. Gronroos, P. Pirkonen, J. Heikkinen, J. Ihalainen, H. Mursunen, and H. Sekki, “Ultrasonic depolymerization of aqueous polyvinyl alcohol,” Ultrasonics Sonochemistry, vol. 8, no. 3, pp. 259–264, 2001. View at Publisher · View at Google Scholar · View at Scopus
  26. S. I. Cho, Study on the Development of Showertype Ultrasonic Clean System, University of Myongji, Seoul, Republic of Korea, 2003, M.S. thesis.