Journals
Publish with us
Publishing partnerships
About us
Blog
Advances in Materials Science and Engineering
Journal overview
For authors
For reviewers
For editors
Table of Contents
Special Issues
Advances in Materials Science and Engineering
/
2018
/
Article
/
Tab 1
/
Research Article
Enhanced Solubility of the Support in an FDM-Based 3D Printed Structure Using Hydrogen Peroxide under Ultrasonication
Table 1
Experimental conditions of FDM-based 3D printing of PVA and PC filaments for the solubility test.
Printing conditions
PVA filament
PC filament
Nozzle temperature
220°C
240°C
Chamber temperature
100°C
Nozzle speed
80 mm/s
Fill density
80%, 50%
100%
Layer height
0.2 mm
Nozzle diameter
0.4 mm