Carbon Nanotube Fiber Pretreatments for Electrodeposition of Copper

<table class="table-group" id="tab2"><tr><td><table class="table"><tr><td class="thead-hr" colspan="2"><hr/></td></tr><tr class="thead"><td class="align_left">Treatment no.</td><td class="align_center">Procedure</td></tr><tr><td class="thead-hr" colspan="2"><hr/></td></tr><tr><td class="align_left">1</td><td class="align_center">Heat treatment, 400°C, 10 min</td></tr><tr><td class="align_left">2</td><td class="align_center">Watts bath immersion, 72 h</td></tr><tr><td class="align_left">3</td><td class="align_center">Watts bath immersion, 60 min</td></tr><tr><td class="align_left">4</td><td class="align_center">Watts bath immersion, 30 min + rinsing</td></tr><tr><td class="align_left">5</td><td class="align_center">Boric acid immersion, 60 min</td></tr><tr><td class="align_left">6</td><td class="align_center">Anodization for 50 s, 2500 mV versus SCE</td></tr><tr class="table-tr"><td colspan="2"><hr class="tbody-hr"/></td></tr></table></td></tr></table>

<div>Used CNT fiber pretreatment methods.</div>

Advances in Materials Science and Engineering

tab2

Table 2

Table 2: Carbon Nanotube Fiber Pretreatments for Electrodeposition of Copper 