Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2018, Article ID 3807609, 14 pages
https://doi.org/10.1155/2018/3807609
Research Article

Evaluation of Carbonisation Gas from Coal and Woody Biomass and Reduction Rate of Carbon Composite Pellets

1Osaka University, 2-1 Yamadaoka, Suita, Osaka 565-0871, Japan
2Graduate School of Engineering, Osaka University, 2-1 Yamadaoka, Suita, Osaka 565-0871, Japan
3Osaka University, JFE Steel Corporation, 1 Kawasaki-cho, Chuo-ku, Chiba 260-0835, Japan
4School of Mines, Federal University of Ouro Preto (UFOP), 35400-000 Ouro Preto, MG, Brazil
5Vanzolini Foundation, University of São Paulo, Avenida Paulista, 967-3° Floor, 01311-100 São Paulo, SP, Brazil
6School of Mines, UFOP, Campus Morro do Cruzeiro, 35400-000 Ouro Preto, MG, Brazil
7School of Mines, UFOP, 522 Igaporã, 46490-000, BA, Brazil
8Materials and Metallurgy, UFOP/REDEMAT, Praça Tiradentes 20, 35400-000 Ouro Preto, MG, Brazil

Correspondence should be addressed to Tateo Usui; pj.ca.u-akaso.gne.tam@iusu

Received 26 June 2017; Accepted 28 September 2017; Published 11 March 2018

Academic Editor: Liming Lu

Copyright © 2018 Tateo Usui et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. T. Ariyama and M. Sato, “Optimization of ironmaking process for reducing CO2 emissions in the integrated steel works,” ISIJ International, vol. 46, no. 12, pp. 1736–1744, 2006. View at Publisher · View at Google Scholar · View at Scopus
  2. M. Asanuma, T. Ariyama, M. Sato et al., “Development of waste plastics injection process in blast furnace,” ISIJ International, vol. 40, no. 3, pp. 244–251, 2000. View at Publisher · View at Google Scholar · View at Scopus
  3. T. Ariyama, R. Murai, J. Ishii, and M. Sato, “Reduction of CO2 emissions from integrated steel works and its subject for a future study,” ISIJ International, vol. 45, no. 10, pp. 1371–1378, 2005. View at Publisher · View at Google Scholar · View at Scopus
  4. T. Matsumura, M. Ichida, T. Nagasaka, and K. Kato, “Carbonization behaviour of woody biomass and resulting metallurgical coke,” ISIJ International, vol. 48, no. 5, pp. 572–577, 2008. View at Publisher · View at Google Scholar · View at Scopus
  5. M. Nakano, M. Naito, K. Higuchi, and K. Morimoto, “Non-spherical carbon composite agglomerates: lab-scale manufacture and quality assessment,” ISIJ International, vol. 44, no. 12, pp. 2079–2085, 2004. View at Publisher · View at Google Scholar · View at Scopus
  6. T. Usui, T. Yokoyama, T. Nakahashi, and Z. Morita, “Effective use of hydrogen within coal in pre-reduction of iron oxide for minimizing the amounts of coal used and CO2 exhausted in an iron bath smelting reduction process,” in Proceedings of Ironmaking Conference, vol. 52, pp. 389–398, The Iron and Steel Society of AIME, Dallas, Texas, USA, March 1993.
  7. T. Usui, N. Inoue, T. Watanabe, T. Yokoyama, T. Oyama, and Z. Morita, “Influence of reduction temperature on pre-reduction of iron oxide with coal carbonisation gas without tar,” Ironmaking and Steelmaking, vol. 31, no. 6, pp. 479–484, 2004. View at Publisher · View at Google Scholar · View at Scopus
  8. N. Inoue and T. Usui, “Influence of combined water in coal on pre-reduction of iron oxide with coal carbonization gas in low, middle and high volatile matter coal,” Journal of High Temperature Society, vol. 35, no. 1, pp. 26–32, 2009. View at Publisher · View at Google Scholar
  9. T. Usui, T. Yokoyama, T. Ohyama, T. Nakahashi, M. Nonaka, and Z. Morita, “Effective use of volatile matter in pre-reduction of iron oxide for minimizing the amounts of coal used in an in-bath smelting reduction process,” in Proceedings of the Second International Symposium on Metallurgical Processes for the Year 2000 and Beyond and the 1994 TMS Extraction and Process Metallurgy Meeting, H. Y. Sohn, Ed., vol. I, pp. 693–714, TMS (The Minerals, Metals and Materials Society), San Diego, CA, USA, September 1994.
  10. H. Konishi, T. Usui, and K. Azuma, “The preparation and reduction behavior of carbon composite iron oxide pellets using semi-coal-char,” Tetsu-to-Hagané, vol. 92, no. 12, pp. 802–808, 2006. View at Publisher · View at Google Scholar · View at Scopus
  11. H. Konishi, A. Yamashita, and T. Usui, “Effect of residual volatile matter on reduction of iron oxide in carbon composite pellets,” Journal of JSEM (Japanese Society for Experimental Mechanics), vol. 8, pp. 142–146, 2008, Special Issue. View at Google Scholar
  12. H. Konishi, T. Usui, and A. Yamashita, “Effect of residual volatile matter on reduction reaction between semi-coal-char and iron oxide,” Tetsu-to-Hagané, vol. 95, no. 6, pp. 467–472, 2009. View at Publisher · View at Google Scholar · View at Scopus
  13. H. Konishi, K. Ichikawa, and T. Usui, “Effect of residual volatile matter on reduction of iron oxide in semi-charcoal composite pellets,” ISIJ International, vol. 50, no. 3, pp. 386–389, 2010. View at Publisher · View at Google Scholar · View at Scopus
  14. H. Konishi, T. Usui, and T. Harada, “The preparation and reduction behavior of charcoal composite iron oxide pellets,” Journal of High Temperature Society, vol. 34, no. 1, pp. 14–19, 2008. View at Publisher · View at Google Scholar
  15. H. Konishi, S. Fujimori, and T. Usui, “Reduction behavior of iron oxide in semi-charcoal composite pellets,” Journal of High Temperature Society, vol. 35, no. 1, pp. 33–39, 2009. View at Publisher · View at Google Scholar
  16. M. Kawakami, H. Taga, T. Takenaka, and S. Yokoyama, “Micro pore structure and reaction rate of coke, wood charcoal and graphite with CO2,” ISIJ International, vol. 44, no. 12, pp. 2018–2022, 2004. View at Publisher · View at Google Scholar · View at Scopus