Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2018, Article ID 3959870, 9 pages
https://doi.org/10.1155/2018/3959870
Research Article

A Parameter Ascertainment Method for the Skeleton Curve of Corroded Reinforcement Concrete Members with Flexure and Compression

Department of Civil Engineering, Harbin Institute of Technology, Weihai 264209, China

Correspondence should be addressed to Y. Z. Zhang; nc.ude.tih@zyhz

Received 16 November 2017; Accepted 9 January 2018; Published 14 March 2018

Academic Editor: Carlo Santulli

Copyright © 2018 G. F. Chen et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. C. Andrade, C. Alonso, and F. Molina, “Cover cracking as a function of bar corrosion: Part I-experimental test,” Materials and Structures, vol. 26, no. 8, pp. 453–464, 1993. View at Publisher · View at Google Scholar · View at Scopus
  2. X. G. Zhang, M. H. Li, L. P. Tang et al., “Corrosion induced stress field and cracking time of reinforced concrete with initial defects: Analytical modeling and experimental investigation,” Corrosion Science, vol. 120, no. 15, pp. 158–170, 2017. View at Publisher · View at Google Scholar · View at Scopus
  3. Y. L. Zhang and R. K. Leung Su, “Concrete cover tensile capacity of corroded reinforced concrete,” Construction and Building Materials, vol. 136, pp. 57–64, 2017. View at Publisher · View at Google Scholar · View at Scopus
  4. K. Lundgren, “Effect of corrosion on the bond between steel and concrete: an overview,” Magazine of Concrete Research, vol. 59, no. 6, pp. 447–461, 2007. View at Publisher · View at Google Scholar · View at Scopus
  5. X. H. Wang and X. L. Liu, “Bond strength modeling for corroded reinforcements,” Construction and Building Materials, vol. 20, no. 3, pp. 177–186, 2006. View at Publisher · View at Google Scholar · View at Scopus
  6. G. Xu, J. Wei, K. Zhang, and X. Zhou, “A calculation model for corrosion cracking in RC structures,” Journal of China University of Geosciences, vol. 18, no. 1, pp. 85–89, 2007. View at Publisher · View at Google Scholar · View at Scopus
  7. B. Juraj and H. Ivan, “Effect of reinforcement corrosion on bond behavior,” Procedia Engineering, vol. 65, pp. 248–253, 2013. View at Publisher · View at Google Scholar · View at Scopus
  8. C. Q. Li, J. J. Zheng, W. Lawanwisut, and R. E. Melchers, “Concrete delamination caused by steel reinforcement corrosion,” Journal of Materials in Civil Engineering, vol. 19, no. 7, pp. 591–600, 2007. View at Publisher · View at Google Scholar · View at Scopus
  9. Y. F. Fan, Z. Q. Hu, Y. Z. Zhang, and J. L. Liu, “Deterioration of compressive property of concrete under simulated acid rain environment,” Construction and Building Materials, vol. 24, no. 10, pp. 1975–1983, 2010. View at Publisher · View at Google Scholar · View at Scopus
  10. M. C. Chen, K. Wang, and L. Xie, “Deterioration mechanism of cementitious materials under acid rain attack,” Engineering Failure Analysis, vol. 27, pp. 272–285, 2013. View at Publisher · View at Google Scholar · View at Scopus
  11. S. Imperatore, Z. Rinaldi, and C. Drago, “Degradation relationships for the mechanical properties of corroded steel rebars,” Construction and Building Materials, vol. 148, pp. 219–230, 2017. View at Publisher · View at Google Scholar · View at Scopus
  12. A. A. Almusallam, “Effect of degree of corrosion on the properties of reinforcing steel bars,” Construction and Building Materials, vol. 15, no. 8, pp. 361–368, 2001. View at Publisher · View at Google Scholar · View at Scopus
  13. L. Berto, A. Saetta, and P. Simioni, “Structural risk assessment of corroding RC structures under seismic excitation,” Construction and Building Materials, vol. 30, pp. 803–813, 2012. View at Publisher · View at Google Scholar · View at Scopus
  14. W. Yuan, A. X. Guo, and H. Li, “Seismic failure mode of coastal bridge piers considering the effects of corrosion-induced damage,” Soil Dynamics and Earthquake Engineering, vol. 93, pp. 135–146, 2017. View at Publisher · View at Google Scholar · View at Scopus
  15. Y. C. Ou, H. D. Fan, and N. D. Nguyen, “Long-term seismic performance of reinforced concrete bridges under steel reinforcement corrosion due to chloride attack,” Earthquake Engineering and Structure Dynamics, vol. 42, no. 14, pp. 2113–2127, 2013. View at Publisher · View at Google Scholar · View at Scopus
  16. S. H. Xu, A. B. Li, Z. Y. Ji, and Y. Wang, “Seismic performance of reinforced concrete columns after freeze–thaw cycles,” Construction and Building Materials, vol. 102, no. 15, pp. 861–871, 2016. View at Publisher · View at Google Scholar · View at Scopus
  17. M. Saiidi, “Hysteresis models for reinforced concrete,” Journal of Structural Division, vol. 108, no. 5, pp. 1077–1087, 1982. View at Google Scholar
  18. X. X. Chen, D. T. Niu, and X. M. Wang, “The force-restoring model of corroded reinforced concrete members with flexure and compression,” Journal of Xi’an University of Architecture and Technology, vol. 37, no. 2, pp. 155–159, 2005, in Chinese. View at Google Scholar
  19. J. X. Gong, J. B. Li, and G. F. Zhao, “Restoring force model of corroded reinforced concrete elements,” China Civil Engineering Journal, vol. 38, no. 11, pp. 38–44, 2005, in Chinese. View at Google Scholar
  20. Q. X. Shi, D. T. Niu, and G. Y. Yan, “Experimental research on hysteretic characteristics of corroded R. C. members with flexural and compressive axial loads under repeated horizontal loading,” Earthquake Engineering and Engineering Vibration, vol. 20, no. 4, pp. 44–50, 2000, in Chinese. View at Google Scholar
  21. O. Jinping, H. Zheng, W. Bin, and Q. Fawei, “Seismic damage performance-based design of reinforcement concrete structures,” Earthquake Engineering and Engineering Vibration, vol. 19, no. 1, pp. 21–30, 1999, in Chinese. View at Google Scholar
  22. Y. L. Hui, Z. S. Lin, and R. Li, “Experimental study and analysis on the property of corroder experimental study and analysis on the property of corrode rebar,” Industrial Construction, vol. 27, no. 6, pp. 10–13, 1997, in Chinese. View at Google Scholar
  23. H. S. Lee, T. Noguchi, and F. Tomosawa, “FEM analysis for structural performance of deteriorated RC structures due to rebar corrosion,” in Proceeding of the Second International Conference on Concrete Under Severe Conditions, pp. 327–336, Tromsø, Norway, June 1998.
  24. A. A. Torres-Acosta, S. Navarro-Gutierrez, and J. Teran-Guillen, “Residual flexure capacity of corroded reinforced concrete beams,” Engineering Structures, vol. 29, no. 6, pp. 1145–1152, 2007. View at Publisher · View at Google Scholar · View at Scopus
  25. A. A. Torres-Acosta, M. J. Fabela-Gallegos, A. Muñoz-Noval, D. Vázquez-Vega, J. R. Hernandez-Jimenez, and M. Martínez-Madrid, “Influence of corrosion on the structural stiffness of reinforced concrete beams,” Corrosion, vol. 60, no. 9, pp. 862–872, 2004. View at Publisher · View at Google Scholar · View at Scopus
  26. A. A. Torres-Acosta, M. Martínez-Madrid, and A. Muñoz-Noval, “Remaining structural capacity of concrete beams with localized corrosion of the embedded reinforcing steel,” Materiales de Construcción, vol. 53, no. 271-272, pp. 125–133, 2003. View at Publisher · View at Google Scholar
  27. A. A. Torres-Acosta and M. Martínez-Madrid, “Residual life of corroding reinforced concrete structures in marine environment,” Journal of Materials in Civil Engineering, vol. 15, no. 4, pp. 344–353, 2003. View at Publisher · View at Google Scholar · View at Scopus
  28. X. M. Xue, Research of Seismic Performance and Hysteretic Mode of Corroded Reinforced Concrete Members, Xi’an University of Architecture and Technology, Xi’an, China, 2003, 2003, in Chinese.