Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2018, Article ID 5451398, 5 pages
https://doi.org/10.1155/2018/5451398
Research Article

Fatigue Tests of Concrete Slabs Reinforced with Stainless Steel Bars

1Foshan University, Foshan 528000, China
2Guangdong University of Technology, Guangzhou 510006, China

Correspondence should be addressed to Guoxue Zhang; moc.qq@661210589

Received 20 November 2017; Accepted 17 April 2018; Published 15 May 2018

Academic Editor: Andres Sotelo

Copyright © 2018 Guoxue Zhang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. J. Polák, “Fatigue of steels,” Reference Module in Materials Science and Materials Engineering, ISBN 9780128035818, 2016. View at Google Scholar
  2. R. Strubbia, S. Hereñú, M. C. Marinelli, and I. Alvarez-Armas, “Fatigue damage in coarse-grained lean duplex stainless steels,” Materials Science and Engineering: A, vol. 659, pp. 47–54, 2016. View at Publisher · View at Google Scholar · View at Scopus
  3. X. H. Yang, W. Z. Dui, and G. Liu, “Mechanical properties of 316L stainless steel with nanostructure surface layer induced by surface mechanical attrition treatment,” Key Engineering Materials, vol. 353–358, pp. 1810–1813, 2007. View at Publisher · View at Google Scholar
  4. ASTM A955/A995M, Standard Specification for Deformed and Plain Stainless Steel Bars for Concrete Reinforcement, ASTM, West Conshohocken, PA, USA, 2004.
  5. BS 6744, Stainless Steel Bars for the Reinforcement and Use in Concrete Requirements and Test Methods, British Standards, UK, 2001.
  6. H. Castro, C. Rodriguez, F. J. Belzunceand, and A. F. Canteli, “Mechanical properties and corrosion behavior of stainless steel reinforcing bars,” Journal of Materials Processing Technology, vol. 143-144, pp. 134–137, 2003. View at Publisher · View at Google Scholar · View at Scopus
  7. S. Alih and A. Khelil, “Behavior of inoxydable steel and their performance as reinforcement bars in concrete beam: experimental and nonlinear finite element analysis,” Construction and Building Materials, vol. 37, pp. 481–492, 2012. View at Publisher · View at Google Scholar · View at Scopus
  8. C. Zanuy, L. F. Maya, L. Albajar, and P. de la Fuente, “Transverse fatigue behaviour of lightly reinforced concrete bridge decks,” Engineering Structures, vol. 33, no. 10, pp. 2839–2849, 2011. View at Publisher · View at Google Scholar · View at Scopus
  9. M. Schläfli and E. Brühwiler, “Fatigue of existing reinforced concrete bridge deck slabs,” Engineering Structures, vol. 20, no. 11, pp. 991–998, 1998. View at Publisher · View at Google Scholar · View at Scopus
  10. GB/T 50152, Standard for Test Method of Concrete Structure, Ministry of Housing and Urban-Rural Construction, China, 2012.
  11. GB50010, Code for Design of Concrete Structures, Ministry of Housing and Urban-Rural Construction, China, 2010.
  12. W. S. Easterling and C. S. Young, “Strength of composite slabs,” Journal of Structural Engineering, vol. 118, no. 9, pp. 2370–2389, 1992. View at Publisher · View at Google Scholar · View at Scopus
  13. S. Arnold, P. Fleming, S. Austin, and P. Robins, “A test method and deterioration model for joints and cracks in concrete slabs,” Cement and Concrete Research, vol. 35, no. 12, pp. 2371–2383, 2005. View at Publisher · View at Google Scholar · View at Scopus
  14. K. N. Lakshmikandhan, P. Sivakumar, R. Ravichandran, and S. Arul Jayachandran, “Investigations on efficiently interfaced steel concrete composite deck slabs,” Journal of Structures, vol. 2013, Article ID 628759, 10 pages, 2013. View at Publisher · View at Google Scholar
  15. J. Polák, “Cyclic deformation, crack initiation, and low-cycle fatigue,” Comprehensive Structural Integrity, I. Milne, R. O. Ritchie, and B. Karihaloo, Eds., ISBN 9780080437491, Pergamon, Oxford, UK, 2003. View at Google Scholar
  16. P. Paramasivam, K. C. G. Ong, B. G. Ong, and S. L. Lee, “Performance of repaired reinforced concrete slabs under static and cyclic loadings,” Cement and Concrete Composites, vol. 17, no. 1, 1995. View at Publisher · View at Google Scholar · View at Scopus
  17. A. K. M. Jahangir Alam and K. M. Amanat, “Finite element simulation on punching shear behavior of reinforced concrete slabs,” ISRN Civil Engineering, vol. 2012, Article ID 501816, 9 pages, 2012. View at Publisher · View at Google Scholar
  18. C. G. Cho, B. Y. Lee, Y. Y. Kim, B. C. Han, and S. J. Lee, “Flexural behavior of extruded DFRCC panel and reinforced concrete composite slab,” Advances in Materials Science and Engineering, vol. 2012, Article ID 460541, 8 pages, 2012. View at Publisher · View at Google Scholar · View at Scopus
  19. S. T. Tu and X. C. Zhang, “Fatigue crack initiation mechanisms,” Reference Module in Materials Science and Materials Engineering, ISBN 9780128035818, 2016. View at Google Scholar
  20. C. Gaedicke, J. Roesler, and S. Shah, “Fatigue crack growth prediction in concrete slabs,” International Journal of Fatigue, vol. 31, no. 8-9, pp. 1309–1317, 2009. View at Publisher · View at Google Scholar · View at Scopus
  21. M. C. Marinelli, R. Strubbia, S. Hereñu, and I. Alvarez-Armas, “Experimental and numerical analysis of short fatigue cracks in lean duplex stainless steels,” Procedia Engineering, vol. 74, pp. 183–186, 2014. View at Publisher · View at Google Scholar · View at Scopus
  22. C. S. Shin and S. W. Lin, “Evaluating fatigue crack propagation properties using miniature specimens,” International Journal of Fatigue, vol. 43, pp. 105–110, 2012. View at Publisher · View at Google Scholar · View at Scopus