Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2018 (2018), Article ID 5810180, 10 pages
https://doi.org/10.1155/2018/5810180
Research Article

Strength and Failure Mechanism of Composite-Steel Adhesive Bond Single Lap Joints

State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body, Hunan University, Changsha, Hunan 410082, China

Correspondence should be addressed to Xujing Yang; nc.ude.unh@gnijuxgnay

Received 19 October 2017; Accepted 16 January 2018; Published 21 March 2018

Academic Editor: Aniello Riccio

Copyright © 2018 Kai Wei et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. K. J. Jadee and A. R. Othman, “Fiber reinforced composite structure with bolted joint—a review,” Key Engineering Materials, vol. 471-472, pp. 939–944, 2011. View at Publisher · View at Google Scholar · View at Scopus
  2. D. V. T. G. Pavan Kumar, S. Sathiya Naarayan, S. Kalyana Sundaram, and S. Chandra, “Further numerical and experimental failure studies on single and multi-row riveted lap joints,” Engineering Failure Analysis, vol. 20, pp. 9–24, 2012. View at Publisher · View at Google Scholar · View at Scopus
  3. A. T. T. Nguyen, C. K. Amarasinghe, M. Brandt, S. Feih, and A. C. Orifici, “Loading, support and geometry effects for pin-reinforced hybrid metal-composite joints,” Composites Part A: Applied Science and Manufacturing, vol. 98, pp. 192–206, 2017. View at Publisher · View at Google Scholar · View at Scopus
  4. N. Chowdhury, W. K. Chiu, J. Wang, and P. Chang, “Static and fatigue testing thin riveted, bonded and hybrid carbon fiber double lap joints used in aircraft structures,” Composite Structures, vol. 121, pp. 315–323, 2015. View at Publisher · View at Google Scholar · View at Scopus
  5. A. Riccio, R. Ricchiuto, F. Di Caprio, A. Sellitto, and A. Raimondo, “Numerical investigation of constitutive material models on bonded joints in scarf repaired composite laminates,” Engineering Fracture Mechanics, vol. 173, pp. 91–106, 2017. View at Publisher · View at Google Scholar · View at Scopus
  6. G. R. Rajkumar, M. Krishna, H. N. Narasimhamurthy, and Y. C. Keshavamurthy, “Statistical investigation of the effect of process parameters on the shear strength of metal adhesive joints,” Journal of The Institution of Engineers (India): Series C, vol. 98, pp. 335–342, 2016. View at Publisher · View at Google Scholar · View at Scopus
  7. L. Liao, C. Huang, and T. Sawa, “Effect of adhesive thickness, adhesive type and scarf angle on the mechanical properties of scarf adhesive joints,” International Journal of Solids and Structures, vol. 50, no. 25-26, pp. 4333–4340, 2013. View at Publisher · View at Google Scholar · View at Scopus
  8. A. J. Gunnion and I. Herszberg, “Parametric study of scarf joints in composite structures,” Composite Structures, vol. 75, no. 1–4, pp. 364–376, 2006. View at Publisher · View at Google Scholar · View at Scopus
  9. L. F. M. da Silva, T. N. S. S. Rodrigues, M. A. V. Figueiredo, M. F. S. F de Moura, and J. A. G. Chousal, “Effect of adhesive type and thickness on the lap shear strength,” Journal of Adhesion, vol. 82, no. 11, pp. 1091–1115, 2006. View at Publisher · View at Google Scholar · View at Scopus
  10. D.-B. Lee, T. Ikeda, N. Miyazaki, and N.-S. Choi, “Effect of bond thickness on the fracture toughness of adhesive joints,” Journal of Engineering Materials and Technology, vol. 126, no. 1, p. 14, 2004. View at Publisher · View at Google Scholar · View at Scopus
  11. M. You, Z. Li, X.-L. Zheng, S. Yu, G.-Y. Li, and D.-X. Sun, “A numerical and experimental study of preformed angle in the lap zone on adhesively bonded steel single lap joint,” International Journal of Adhesion and Adhesives, vol. 29, no. 3, pp. 280–285, 2009. View at Publisher · View at Google Scholar · View at Scopus
  12. S. L. S. Nunes, R. D. S. G. Campilho, F. J. G. Da Silva et al., “Comparative failure assessment of single and double lap joints with varying adhesive systems,” Journal of Adhesion, vol. 92, no. 7–9, pp. 610–634, 2016. View at Publisher · View at Google Scholar · View at Scopus
  13. M. You, Z.-M. Yan, X.-L. Zheng, H.-Z. Yu, and Z. Li, “A numerical and experimental study of adhesively bonded aluminium single lap joints with an inner chamfer on the adherends,” International Journal of Adhesion and Adhesives, vol. 28, no. 1-2, pp. 71–76, 2008. View at Publisher · View at Google Scholar · View at Scopus
  14. S. Akpinar, M. O. Doru, A. Özel, M. D. Aydin, and H. G. Jahanpasand, “The effect of the spew fillet on an adhesively bonded single-lap joint subjected to bending moment,” Composites Part B: Engineering, vol. 55, pp. 55–64, 2013. View at Publisher · View at Google Scholar · View at Scopus
  15. A. M. Pereira, J. M. Ferreira, F. V. Antunes, and P. J. Bártolo, “Analysis of manufacturing parameters on the shear strength of aluminium adhesive single-lap joints,” Journal of Materials Processing Technology, vol. 210, no. 4, pp. 610–617, 2010. View at Publisher · View at Google Scholar · View at Scopus
  16. C. Sperandio, J. Bardon, A. Laachachi, H. Aubriet, and D. Ruch, “Influence of plasma surface treatment on bond strength behaviour of an adhesively bonded aluminium-epoxy system,” International Journal of Adhesion and Adhesives, vol. 30, no. 8, pp. 720–728, 2010. View at Publisher · View at Google Scholar · View at Scopus
  17. M. Elhannani, K. Madani, E. Legrand, S. Touzain, and X. Feaugas, “Numerical analysis of the effect of the presence, number and shape of bonding defect on the shear stresses distribution in an adhesive layer for the single-lap bonded joint; part 1,” Aerospace Science and Technology, vol. 62, pp. 122–135, 2017. View at Publisher · View at Google Scholar · View at Scopus
  18. A. Riccio, G. Di Felice, F. Scaramuzzino, and A. Sellitto, “A practical tool for the preliminary design of bonded composite repairs,” Applied Composite Materials, vol. 21, no. 3, pp. 495–509, 2014. View at Publisher · View at Google Scholar · View at Scopus
  19. K. N. Anyfantis and N. G. Tsouvalis, “Loading and fracture response of CFRP-to-steel adhesively bonded joints with thick adherents—part II: numerical simulation,” Composite Structures, vol. 96, pp. 858–868, 2013. View at Publisher · View at Google Scholar · View at Scopus
  20. T. E. A. Ribeiro, R. D. S. G. Campilho, L. F. M. da Silva, and L. Goglio, “Damage analysis of composite–aluminium adhesively-bonded single-lap joints,” Composite Structures, vol. 136, pp. 25–33, 2016. View at Publisher · View at Google Scholar · View at Scopus
  21. A. Riccio, A. Sellitto, S. Saputo, A. Russo, M. Zarrelli, and V. Lopresto, “Modelling the damage evolution in notched omega stiffened composite panels under compression,” Composites Part B: Engineering, vol. 126, pp. 60–71, 2017. View at Publisher · View at Google Scholar · View at Scopus
  22. W. Xu and Y. Wei, “Strength and interface failure mechanism of adhesive joints,” International Journal of Adhesion and Adhesives, vol. 34, pp. 80–92, 2012. View at Publisher · View at Google Scholar · View at Scopus