Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2018, Article ID 6303681, 6 pages
Research Article

Investigation of Rheological Properties of Blended Cement Pastes Using Rotational Viscometer and Dynamic Shear Rheometer

1Department of Engineering Technology, Texas State University, 601 University Drive, San Marcos, TX 78666, USA
2Department of Architectural Engineering, University of Seoul, 163 Seoulsiripdae-ro, Dongdaemun-gu, Seoul 02504, Republic of Korea
3Department of Civil Engineering, University of Nebraska-Lincoln, 1400 R Street, Lincoln, NE 68588, USA

Correspondence should be addressed to Yoo Jae Kim; ude.etatsxt@01ky

Received 4 December 2017; Revised 16 December 2017; Accepted 25 December 2017; Published 8 February 2018

Academic Editor: João M. P. Q. Delgado

Copyright © 2018 Yoo Jae Kim et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. American Concrete Institute, ACI Manual of Concrete Practice, American Concrete Institute, Farmington Hills, MI, USA, 2017.
  2. W. Chen and H. Huang, “Effect of fly ash on rheological properties of cement paste,” Journal of Wuhan University of Technology, vol. 32, no. 17, pp. 186–192, 2010. View at Google Scholar
  3. J. E. Wallevik, “Rheological properties of cement paste: thixotropic behavior and structural breakdown,” Cement and Concrete Research, vol. 39, no. 1, pp. 14–29, 2009. View at Publisher · View at Google Scholar · View at Scopus
  4. C. F. Ferraris and N. S. Martys, “Relating fresh concrete viscosity measurements from different rheometers,” Journal of Research of the National Institute of Standards and Technology, vol. 108, no. 3, pp. 229–234, 2003. View at Publisher · View at Google Scholar
  5. L. Struble and G.-K. Sun, “Viscosity of Portland cement paste as a function of concentration,” Advanced Cement Based Materials, vol. 2, no. 2, pp. 62–69, 1995. View at Publisher · View at Google Scholar · View at Scopus
  6. K. Kovler and N. Roussel, “Properties of fresh and hardened concrete,” Cement and Concrete Research, vol. 41, no. 7, pp. 775–792, 2011. View at Publisher · View at Google Scholar · View at Scopus
  7. L. Struble and R. Szecsy, “Rheology of Fresh Concrete,” Materials for the New Millennium: Proceedings of the Fourth Materials Engineering Conference, K. P. Chong, Ed., American Society of Civil Engineers, Washington, DC, USA, 1996. View at Google Scholar
  8. M. Bellotto, “Cement paste prior to setting: a rheological approach,” Cement and Concrete Research, vol. 52, pp. 162–168, 2013. View at Publisher · View at Google Scholar · View at Scopus
  9. P. Banfill, “The rheology of fresh cement and concrete−a review,” in Proceedings of the 11th International Cement Chemistry Congress, Watt University, Durban, South Africa, May 2003.
  10. J. E. Wallevik, “Thixotropic investigation on cement paste: experimental and numerical approach,” Journal of Non-Newtonian Fluid Mechanics, vol. 132, no. 1–3, pp. 86–99, 2005. View at Publisher · View at Google Scholar · View at Scopus
  11. The Asphalt Institute, Superpave Series No. 1-Performance Graded Asphalt: Binder Specification and Testing, The Asphalt Institute, Lexington, KY, USA, 2003.