Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2018 (2018), Article ID 6502890, 11 pages
https://doi.org/10.1155/2018/6502890
Research Article

Feasibility Assessment of Incorporating Copper Slag as a Sand Substitute to Attain Sustainable Production Perspective in Concrete

1Civil Engineering Department, NDMVPS’s KBT College of Engineering, Nashik, Maharashtra 422013, India
2Applied Mechanics Department, Sardar Vallabhbhai National Institute of Technology, Surat, Gujarat 395007, India

Correspondence should be addressed to Akshaykumar M. Bhoi; moc.liamg@iohbyahska

Received 28 May 2017; Revised 12 November 2017; Accepted 4 December 2017; Published 11 February 2018

Academic Editor: Jose M. Monzo

Copyright © 2018 Akshaykumar M. Bhoi et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Akshaykumar M. Bhoi, Yogesh D. Patil, Hemant S. Patil, and Madhav P. Kadam, “Feasibility Assessment of Incorporating Copper Slag as a Sand Substitute to Attain Sustainable Production Perspective in Concrete,” Advances in Materials Science and Engineering, vol. 2018, Article ID 6502890, 11 pages, 2018. doi:10.1155/2018/6502890