Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2018 (2018), Article ID 6839350, 8 pages
https://doi.org/10.1155/2018/6839350
Research Article

Effects of Reinforcing Fiber and Microsilica on the Mechanical and Chloride Ion Penetration Properties of Latex-Modified Fiber-Reinforced Rapid-Set Cement Concrete for Pavement Repair

1Department of Bio-Industry Mechanical Engineering, Kongju National University, Yesan 32439, Republic of Korea
2Department of Rural Construction Engineering, Kongju National University, Yesan 32439, Republic of Korea
3Department of Civil Engineering, University of Suwon, Hwaseong 18323, Republic of Korea
4Rural Research Institute, Korea Rural Community Corporation, Ansan 15634, Republic of Korea

Correspondence should be addressed to Chan-Gi Park

Received 22 August 2017; Accepted 29 October 2017; Published 21 January 2018

Academic Editor: Young Hoon Kim

Copyright © 2018 Woong Kim et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. J. P. Won, J. M. Kim, S. J. Lee, S. W. Lee, and S. K. Park, “Mix proportion of high-strength, roller-compacted, latex-modified rapid-set concrete for rapid road repair,” Construction and Building Materials, vol. 25, no. 4, pp. 1796–1800, 2011. View at Publisher · View at Google Scholar · View at Scopus
  2. ACI, “State-of-the-art report on roller compacted concrete pavements,” 2 Tech. Rep.32510R-95, American Concrete Institute, Farmington Hills, MI, USA, 1995. View at Google Scholar
  3. J. La Hucik, S. Dahal, J. Roesler, and A. N. Amirkhanian, “Mechanical properties of roller-compacted concrete with macro-fibers,” Construction and Building Materials, vol. 135, pp. 440–446, 2017. View at Publisher · View at Google Scholar · View at Scopus
  4. S. Krishna Rao, P. Sravana, and T. Chandrasekhar Rao, “Abrasion resistance and mechanical properties of roller compacted concrete with GGBS,” Construction and Building Materials, vol. 114, pp. 925–933, 2016. View at Publisher · View at Google Scholar · View at Scopus
  5. S. Krishna Rao, P. Sravana, and T. Chandrasekhar Rao, “Investigating the effect of M-sand on abrasion resistance of fly ash roller compacted concrete (FRCC),” Construction and Building Materials, vol. 118, pp. 352–363, 2016. View at Publisher · View at Google Scholar · View at Scopus
  6. J. N. Karadelis and Y. Lin, “Flexural strengths and fibre efficiency of steel-fibre-reinforced, roller-compacted, polymer modified concrete,” Construction and Building Materials, vol. 93, pp. 498–505, 2015. View at Publisher · View at Google Scholar · View at Scopus
  7. J.-W. Han, J.-H. Jeon, and C.-G. Park, “Mechanical and permeability characteristics of latex-modified pre-packed pavement repair concrete as a function of the rapid-set binder content,” Materials, vol. 8, no. 10, pp. 6728–6737, 2015. View at Publisher · View at Google Scholar · View at Scopus
  8. J. P. Won, J. H. Kim, C. G. Park, and J. W. Kang, “Shrinkage cracking of styrene butadiene polymeric emulsion-modified concrete using rapid-hardening cement,” Journal of Applied Polymer Science, vol. 112, no. 4, pp. 2229–2234, 2009. View at Publisher · View at Google Scholar · View at Scopus
  9. M. Sprinkel, “Latex-modified concrete overlay containing type K cement,” Tech. Rep. FHWA/VTRC 05–R26, Virginia Transportation Research Council, Charlottesville, VA, USA, 2005. View at Google Scholar
  10. M. Sprinkel, “High early strength latex modified concrete overlay,” Tech. Rep. VTRC 88–R12, Virginia Transportation Research Council, Charlottesville, VA, USA, 1998. View at Google Scholar
  11. M. Sprinkel, “Very-early-strength latex-modified concrete over-lays,” Tech. Rep. TAT99–TAR3, Virginia Transportation Research Council, Charlottesville, VA, USA, 1998. View at Google Scholar
  12. Z. J. Ricardo, “Development of rapid, cement-based repair materials for transportation structures,” M.S. thesis, The University of Texas at Austin, Austin, TX, USA, 2013. View at Google Scholar
  13. D. H. Kim and C. G. Park, “Permeability, abrasion, and impact resistance of latex-modified fibre reinforced concrete for precast concrete pavement application,” Progress in Rubber, Plastics & Recycling Technology, vol. 29, pp. 239–254, 2013. View at Google Scholar
  14. R. O. Oh, D. H. Kim, and C. G. Park, “Durability performance of latex modified nylon fiber reinforced concrete for precast concrete pavement applications,” Indian Journal of Engineering and Materials Sciences, vol. 21, pp. 49–56, 2014. View at Google Scholar
  15. D. H. Kim and C. G. Park, “Strength, permeability and durability of hybrid fiber-reinforced concrete containing styrene butadiene latex,” Journal of Applied Polymer Science, vol. 129, pp. 1499–1505, 2013. View at Google Scholar
  16. S. K. Lee, M. J. Jeon, S. S. Cha, and C. G. Park, “Mechanical and permeability characteristics of latex-modified fiber-reinforced roller-compacted rapid-hardening-cement concrete for pavement repair,” Applied Sciences, vol. 7, no. 7, p. 694, 2017. View at Publisher · View at Google Scholar
  17. A. Dousti, M. Shekarchi, R. Alizadeh, and A. Taheri-Motlagh, “Binding of externally supplied chlorides in micro silica concrete under field exposure conditions,” Cement and Concrete Composites, vol. 33, no. 10, pp. 1071–1079, 2011. View at Publisher · View at Google Scholar · View at Scopus
  18. AASHTO, Standard Specification of Rigid Pavement, American Association of State Highway and Transportation Officials, Washington, DC, USA, 1998.
  19. Korea Expressway Corporation, Construction Material Quality and Standard for Highway Construction, Korea Expressway Corporation, Seongnam, Republic of Korea, 2005.
  20. ASTM C39, Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens, American Society for Testing Materials, Philadelphia, PA, USA, 2015.
  21. ASTM C496/C496M, Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens, American Society for Testing Materials, Philadelphia, PA, USA, 2011.
  22. ASTM C 78/C78M, Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading), American Society for Testing Materials, Philadelphia, PA, USA, 2015.
  23. ASTM C1202, Standard Test Method for Electrical Indication of Concrete’s Ability to Resist Chloride Ion Penetration, American Society for Testing Materials, Philadelphia, PA, USA, 2012.
  24. ASTM C944, Standard Test Method for Abrasion Resistance of Concrete or Mortar Surfaces by the Rotating-Cutter Method, American Society for Testing Materials, Philadelphia, PA, USA, 2012.
  25. J. P. Won, D. H. Lim, C. G. Park, and H. G. Park, “Bond behavior and flexural performance of structural synthetic fiber reinforced concrete,” Magazine of Concrete Research, vol. 28, no. 6, pp. 401–410, 2003. View at Google Scholar
  26. J. P. Won, C. G. Park, S. W. Lee, C. I. Jang, and H. Y. Kim, “Performance of synthetic macrofibers in reinforced concrete for tunnel linings,” Magazine of Concrete Research, vol. 61, no. 3, pp. 165–172, 2009. View at Publisher · View at Google Scholar · View at Scopus
  27. A. Bentur and S. Mindess, Fiber Reinforced Cementitious Composites, Elsevier Applied Science, London, UK, 1992.