Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2018, Article ID 7067608, 9 pages
https://doi.org/10.1155/2018/7067608
Research Article

Static and Dynamic Properties and Temperature Sensitivity of Emulsified Asphalt Concrete

1School of Civil Engineering, Wuhan University, No. 8 East-Lake South Road, Wuhan, China
2Guangzhou Environmental Protection Investment Group Co., Ltd., Guangzhou, China

Correspondence should be addressed to Yuting Zhang; moc.361@uhwtygnahz

Received 17 November 2017; Revised 1 April 2018; Accepted 6 May 2018; Published 10 June 2018

Academic Editor: Baozhong Sun

Copyright © 2018 Bin Huang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. J. J. Feng, Y. X. Ge, and Z. X. Sun, “Experimental study on stress-strain relationship of asphalt concrete,” Journal of Hydraulic Engineering, vol. 11, pp. 56–62, 1987. View at Google Scholar
  2. S. Feizi-Khankandi, A. A. Mirghasemi, A. Ghalandarzadeh, and K. Kaare Hoeg, “Cyclic triaxial tests on asphalt concrete as a water barrier for embankment dams,” Soils and Foundations, vol. 48, no. 3, pp. 319–332, 2008. View at Publisher · View at Google Scholar · View at Scopus
  3. Y. Chen, T. Jiang, Z. Q. Huang et al., “Effect of temperature on mechanical properties of asphalt concrete,” Rock and Soil Mechanics, vol. 31, no. 7, pp. 2192–2196, 2010. View at Google Scholar
  4. J. C. Guo, “Triaxial tests and stress-strain characteristics of asphalt concrete,” Water Resources and Hydropower Engineering, vol. 9, pp. 58–64, 1981. View at Google Scholar
  5. W. B. Wang, Z. T. Sun, and L. Y. Wu, “Study on stress-strain characteristics of asphalt concrete,” Journal of Hydraulic Engineering, vol. 5, pp. 1–8, 1996. View at Google Scholar
  6. Z. Q. Li, H. R. Zhang, and Y. F. Hou, “Triaxial test study on mechanical characteristics of asphalt concrete in the core wall of earth-rock fill dam,” Chinese Journal of Rock Mechanics and Engineering, vol. 25, no. 5, pp. 997–1002, 2006. View at Google Scholar
  7. Q. J. Ding, X. L. Huang, H. X. Wang, C. Z. Huang, and Q. Jing, “Adopt the method of dense proportion design to produce high-performance concrete with high fii volume,” Concrete, 2007. View at Google Scholar
  8. B. Huang, Z. L. Cheng, X. B. Rao et al., A High-Low Temperature Controlling Equipment of Triaxial Tests, 201420144307.4 [P], China, 2014.
  9. J. M. Duncan, Strength, Stress-Strain and Bulk Modulus Parameters for Finite Element Analyses of Stresses and Movements in Soil Masses, University of California, Berkeley, CA, USA, 1980.
  10. B. Huang, X. Y. Wu, and F. Tan, “Experimental study on mechanics characteristics of hydraulic asphalt concrete,” in Proceedings of the Technology for Earth-Rockfill Dam 2012, pp. 476–481, Dandong, 2012.
  11. W. Wang, K. Hoeg, and M. Asce, “Cyclic behavior of asphalt concrete used as impervious core in embankment dams,” Journal of Geotechnical and Geoenvironmental Engineering, vol. 137, no. 5, pp. 536–544, 2011. View at Publisher · View at Google Scholar · View at Scopus
  12. DL/T 5362-2006, Hydraulic Asphalt Concrete Testing Regulations, China Electric Power Press, Beijing, China.