Research Article
Optimization of FCAW Parameters for Ferrite Content in 2205 DSS Welds Based on the Taguchi Design Method
Table 5
Process parameter and response constraint.
| Parameter or response | Limit | Goals | Importance | Lower | Upper | | 3 |
| Welding current | 160 | 240 | Is in range | 3 | Welding voltage | 20 | 26 | Is in range | 3 | Welding speed | 18 | 26 | Is in range | 3 | Welding torch angle with reference to vertical | 0 | 30 | Is in range | 3 | Ferrite content | 31.3 | 51.3 | Is target = 50 | 3 |
|
|