Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2018, Article ID 8026798, 9 pages
https://doi.org/10.1155/2018/8026798
Research Article

Evaluation of Fracture Resistance of Asphalt Mixtures Using the Single-Edge Notched Beams

1CCCC First Highway Consultants Co., Ltd., Xi’an, Shaanxi 710065, China
2School of Architecture and Civil Engineering, Xi’an University of Science and Technology, Xi’an, Shaanxi, China
3Guangxi Key Lab of Road Structure and Materials, Guangxi Transportation Research & Consulting Co., Ltd., Nanning, Guangxi, China
4Key Laboratory for Special Area Highway Engineering of Ministry of Education, Chang’an University, Xi’an, Shaanxi, China
5School of Highway, Chang’an University, Xi’an, Shaanxi, China

Correspondence should be addressed to Xiaolong Zou; moc.361@4321_gnoloaixuoz

Received 25 October 2017; Accepted 20 March 2018; Published 12 April 2018

Academic Editor: Hiroshi Noguchi

Copyright © 2018 Biao Ding et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. H. Kim, M. P. Wagoner, and W. G. Buttlar, “Simulation of fracture behavior in asphalt concrete using a heterogeneous cohesive zone discrete element model,” Journal of Materials in Civil Engineering, vol. 20, no. 8, pp. 552–563, 2008. View at Publisher · View at Google Scholar · View at Scopus
  2. Q. Dai and K. Ng, “2D cohesive zone modeling of crack development in cementitious digital samples with microstructure characterization,” Construction and Building Materials, vol. 54, pp. 584–595, 2014. View at Publisher · View at Google Scholar · View at Scopus
  3. I. Artamendi and H. A. Khalid, “A comparison between beam and semi-circular bending fracture tests for asphalt,” Road Materials and Pavement Design, vol. 7, no. s1, pp. 163–180, 2011. View at Publisher · View at Google Scholar · View at Scopus
  4. M. H. Sadd and Q. Dai, “A comparison of micro-mechanical modeling of asphalt materials using finite elements and doublet mechanics,” Mechanics of Materials, vol. 37, no. 6, pp. 641–662, 2005. View at Publisher · View at Google Scholar · View at Scopus
  5. W. Buttlar and Z. You, “Discrete element modeling of asphalt concrete: Microfabric approach,” Transportation Research Record: Journal of the Transportation Research Board, vol. 1757, pp. 111–118, 2001. View at Publisher · View at Google Scholar
  6. S. J. Sulaiman and A. F. Stock, “The use of fracture mechanics for the evaluation of asphalt mixes,” in Association of Asphalt Paving Technologists Technical Sessions, 1995, pp. 500–531, Portland, OR, USA, 1995.
  7. J. M. M. Molenaar and A. A. A. Molenaar, “Fracture toughness of asphalt in the semi-circular bend test,” in Proceedings of the 2nd Eurasphalt & Eurobitume Congress, pp. 509–517, Barcelona, Spain, September 2000.
  8. M. P. Wagnoner, W. G. Buttlar, and G. H. Paulino, “Disk-shaped compact tension test for asphalt concrete fracture,” Experimental Mechanics, vol. 45, no. 3, pp. 270–277, 2005. View at Publisher · View at Google Scholar
  9. G. S. Xeidakis, I. S. Samaras, D. A. Zacharopoulos, and G. E. Papakaliatakis, “Crack growth in a mixed-mode loading on marble beams under three point bending,” International Journal of Fracture, vol. 79, no. 2, pp. 197–208, 1996. View at Publisher · View at Google Scholar
  10. A. Braham, W. Buttlar, and F. Ni, “Laboratory mixed-mode cracking of asphalt concrete using the single-edge notch beam,” Road Materials and Pavement Design, vol. 11, no. 4, pp. 947–968, 2011. View at Publisher · View at Google Scholar · View at Scopus
  11. J. E. Srawley, “Wide range fracture toughness expressions for ASTM E 399 standard fracture toughness specimens,” International Journal of Fracture, vol. 12, no. 3, pp. 475-476, 1976. View at Google Scholar
  12. Y. Murakami and S. Aoki, Stress Intensity Factors Handbook, vol. 2, Pergamon, Oxford, UK, 1987.
  13. J. E. Srawley and W. F. Brown Jr., Fracture Toughness Testing, National Aeronautics and Space Administration, Lewis Research Center, Cleveland, OH, USA, 1965.
  14. J. E. Srawley and B. Gross, Stress Intensity Factors for Crackline-Loaded Edge-Crack Specimens, National Aeronautics and Space Administration, Washington, DC, USA, 1967.
  15. J. E. Srawley, M. H. Jones, and B. Gross, Experimental Determination of the Dependence of Crack Extension Force on Crack Length for a Single-Edge-Notch Tension Specimen, National Aeronautics and Space Administration, Washington, DC, USA, 1964.
  16. RILEM, “Determination of the fracture energy of mortar and concrete by means of three-point bend tests on notched beams,” Materials and Structures, vol. 18, no. 4, pp. 285–290, 1985. View at Google Scholar
  17. P.-E. Petersson and L. Tekniska, Crack Growth and Development of Fracture Zones in Plain Concrete and Similar Materials, Lund Institute of Technology, Lund, Sweden, 1981.
  18. M. Hossain, S. Swartz, and E. Hoque, “Fracture and tensile characteristics of asphalt-rubber concrete,” Journal of Materials in Civil Engineering, vol. 11, no. 4, pp. 287–294, 1999. View at Publisher · View at Google Scholar · View at Scopus
  19. G.-F. Peng, W.-W. Yang, J. Zhao, Y.-F. Liu, S.-H. Bian, and L.-H. Zhao, “Explosive spalling and residual mechanical properties of fiber-toughened high-performance concrete subjected to high temperatures,” Cement and Concrete Research, vol. 36, no. 4, pp. 723–727, 2006. View at Publisher · View at Google Scholar · View at Scopus