Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2018, Article ID 8150791, 12 pages
https://doi.org/10.1155/2018/8150791
Research Article

Preparation of a Self-Lubricating Cu/h-BN Coating on Cemented Carbide

College of Electromechanical Engineering, Qingdao University of Science and Technology, Qingdao 266061, Shandong, China

Correspondence should be addressed to Tongkun Cao; moc.361@ktoac

Received 23 June 2018; Revised 4 November 2018; Accepted 11 November 2018; Published 6 December 2018

Academic Editor: Massimiliano Barletta

Copyright © 2018 Tongkun Cao et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. L. Emanuelli, M. Pellizzari, A. Molinari et al., “Thermal fatigue behaviour of WC-20Co and WC-30(CoNiCrFe) cemented carbide,” International Journal of Refractory Metals and Hard Materials, vol. 60, pp. 118–124, 2016. View at Publisher · View at Google Scholar · View at Scopus
  2. A. Marquezherrera, B. Gabriel, E. Hernandezrodriguez et al., “Boride coating on the surface of WC–Co-based cemented carbide,” International Journal of Materials Research, vol. 107, no. 7, pp. 676–679, 2016. View at Publisher · View at Google Scholar · View at Scopus
  3. Y.-I. Chen, Yu-T. Lin, Li-C. Chang, and J.-W. Lee, “Preparation and annealing study of CrTaN coatings on WC-Co,” Surface and Coatings Technology, vol. 206, no. 7, pp. 1640–1647, 2011. View at Publisher · View at Google Scholar · View at Scopus
  4. J. Tang, J. Xiong, Z. Guo et al., “Microstructure and properties of CVD coated on gradient cemented carbide with different WC grain size,” International Journal of Refractory Metals and Hard Materials, vol. 61, pp. 128–135, 2016. View at Publisher · View at Google Scholar · View at Scopus
  5. C. Wang, C. Jiang, and V. Ji, “Thermal stability of residual stresses and work hardening of shot peened tungsten cemented carbide,” Journal of Materials Processing Technology, vol. 240, pp. 98–103, 2017. View at Publisher · View at Google Scholar · View at Scopus
  6. S. W. Huang, M. Samandi, and M. Brandt, “Abrasive wear performance and microstructure of laser clad WC/Ni layers,” Wear, vol. 256, no. 11-12, pp. 1095–1105, 2004. View at Publisher · View at Google Scholar · View at Scopus
  7. X.-B. Liu, X.-J. Meng, H.-Q. Liu et al., “Development and characterization of laser clad high temperature self-lubricating wear resistant composite coatings on Ti–6Al–4V alloy,” Materials and Design, vol. 55, pp. 404–409, 2014. View at Publisher · View at Google Scholar · View at Scopus
  8. D. Z. Segu, J.-H. Kim, Si G. Choi et al., “Application of Taguchi techniques to study friction and wear properties of MoS2 coatings deposited on laser textured surface,” Surface and Coatings Technology, vol. 232, pp. 504–514, 2013. View at Publisher · View at Google Scholar · View at Scopus
  9. T. Cao and Z. Xiao, “Tribological behaviors of self-lubricating coating prepared by electro-spark deposition,” Tribology Letters, vol. 56, no. 2, pp. 231–237, 2014. View at Publisher · View at Google Scholar · View at Scopus
  10. F. Fernandes, T. Polcar, and A. Cavaleiro, “Tribological properties of self-lubricating TiSiVN coatings at room temperature,” Surface and Coatings Technology, vol. 267, pp. 8–14, 2015. View at Publisher · View at Google Scholar · View at Scopus
  11. Giuseppe Tronci and M. B. Marshall, “Understanding the behaviour of silver as a low friction coating in aerospace fasteners,” Tribology International, vol. 100, pp. 162–170, 2016. View at Publisher · View at Google Scholar · View at Scopus
  12. Y. Wang, J.-W. Lee, and D. Jenq-Gong, “Mechanical strengthening in self-lubricating CrAlN/VN multilayer coatings for improved high-temperature tribological characteristics,” Surface and Coatings Technology, vol. 303, pp. 12–17, 2016. View at Publisher · View at Google Scholar · View at Scopus
  13. Y. Q. Xing, J. X. Deng, X. S. Wang et al., “Effect of laser surface textures combined with multi- solid lubricant coatings on the tribological properties of Al2O3/TiC ceramic,” Wear, vol. 342, pp. 1–12, 2015. View at Publisher · View at Google Scholar · View at Scopus
  14. J. Solis, H. Zhao, C. Wang et al., “Tribological performance of an H-DLC coating prepared by PECVD,” Applied Surface Science, vol. 383, pp. 222–232, 2016. View at Publisher · View at Google Scholar · View at Scopus
  15. H. Du, C. Sun, W. Hua et al., “Structure, mechanical and sliding wear properties of WC–Co/MoS2–Ni coatings by detonation gun spray,” Materials Science and Engineering: A, vol. 445–446, pp. 122–134, 2007. View at Publisher · View at Google Scholar · View at Scopus
  16. X.-L. Lu, X.-B. Liu, P.-C. Yu et al., “Effects of annealing on laser clad Ti2SC/CrS self-lubricating anti-wear composite coatings on Ti6Al4V alloy: microstructure and tribology,” Tribology International, vol. 101, pp. 356–363, 2016. View at Publisher · View at Google Scholar · View at Scopus
  17. D. Salih, A. S. Levent, and K. Kemal, “Characterization and mechanical properties of the duplex coatings produced on steel by electro-spark deposition and micro-arc oxidation,” Surface and Coatings Technology, vol. 236, pp. 303–308, 2013. View at Publisher · View at Google Scholar · View at Scopus
  18. Yu. G. Tkachenko, D. Z. Yurchenko, V. F. Britun, L. P. Isaeva, and V. T. Varchenko, “Structure and properties of wear-resistant spark-deposited coatings produced with a titanium carbide alloy anode,” Powder Metallurgy and Metal Ceramics, vol. 52, no. 5-6, pp. 306–313, 2013. View at Publisher · View at Google Scholar
  19. Y. Kimura and T. Wakabayashi, “Boron nitride as a lubricant additive,” Wear, vol. 232, no. 2, pp. 199–206, 1999. View at Publisher · View at Google Scholar · View at Scopus
  20. X.-L. Lu, X.-B. Liu, P.-C. Yu et al., “Synthesis and characterization of Ni60-hBN high temperature self-lubricating anti-wear composite coatings on Ti6Al4V alloy by laser cladding,” Optics and Laser Technology, vol. 78, pp. 87–94, 2016. View at Publisher · View at Google Scholar · View at Scopus
  21. Z. Shahri, S. R. Allahkaram, and A. Zarebidaki, “Co-BN (h) nanocomposite coatings were prepared by means of the conventional electrodeposition,” Applied Surface Science, vol. 276, pp. 174–181, 2013. View at Publisher · View at Google Scholar · View at Scopus
  22. A. G. Kostornov, I. Fushchich, T. M. Chevychelova et al., “Interaction between components of the copper-based self-lubricating antifriction composite at 900 and 950°C,” Powder Metallurgy and Metal Ceramics, vol. 54, no. 1-2, pp. 16–22, 2015. View at Publisher · View at Google Scholar · View at Scopus
  23. H. Akbulut, G. Hatipoglu, H. Algul et al., “Co-deposition of Cu/WC/graphene hybrid nanocomposites produced by electrophoretic deposition,” Surface and Coatings Technology, vol. 284, pp. 344–352, 2015. View at Publisher · View at Google Scholar · View at Scopus
  24. P. J. Kelly, H. Li, P. S. Benson et al., “Comparison of the tribological and antimicrobial properties of CrN/Ag, ZrN/Ag, TiN/Ag, and TiN/Cu nanocomposite coatings,” Surface and Coatings Technology, vol. 205, no. 5, pp. 1606–1610, 2010. View at Publisher · View at Google Scholar · View at Scopus
  25. T. Cao, S. Lei, and M. Zhang, “The friction and wear behavior of Cu/Cu-MoS2 self-lubricating coating prepared by electrospark deposition,” Surface and Coatings Technology, vol. 270, pp. 24–32, 2015. View at Publisher · View at Google Scholar · View at Scopus
  26. T. Cao and Z. H. Xiao, “Study on self-lubricating coating prepared by electrospark deposition,” Materials Science and Technology, vol. 31, no. 4, pp. 481–486, 2015. View at Publisher · View at Google Scholar · View at Scopus
  27. S. K. Tang, T. C. Nguyen, and Y. Zhou, “Materials transfer in electro-spark deposition of TiCp/Ni metal-matrix composite coating on Cu substrate,” Welding Journal, vol. 89, pp. 172–180, 2010. View at Google Scholar