Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2018, Article ID 8264138, 13 pages
https://doi.org/10.1155/2018/8264138
Research Article

Effect of Multiwalled Carbon Nanotubes and Electroless Copper Plating on the Tensile Behavior of Carbon Fiber Reinforced Polymers

School of Architecture, Soongsil University, 369 Sangdo−ro, Dongjak−gu, Seoul 06978, Republic of Korea

Correspondence should be addressed to Kyoung-Kyu Choi; moc.liamg@79iohckk

Received 26 March 2018; Revised 29 May 2018; Accepted 28 June 2018; Published 19 July 2018

Academic Editor: Ilia Ivanov

Copyright © 2018 Gia Toai Truong et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. E. C. Botelho, R. A. Silva, L. C. Pardini, and M. C. Rezende, “A review on the development and properties of continuous fiber/epoxy/aluminum hybrid composites for aircraft structures,” Materials Research, vol. 9, no. 3, pp. 247–256, 2006. View at Publisher · View at Google Scholar
  2. M. Sharma, S. Gao, E. Mader, H. Sharma, L. Y. Wei, and J. Bijwe, “Carbon fiber surfaces and composite interphases,” Composites Science and Technology, vol. 102, pp. 35–50, 2014. View at Publisher · View at Google Scholar · View at Scopus
  3. P. K. Mallick, Fiber-Reinforced Composites: Materials, Manufacturing, and Design, CRC Press, New York, NY, USA, 3rd edition, 2007.
  4. H. Guo, Y. D. Huang, L. H. Meng, L. Liu, D. P. Fan, and D. X. Liu, “Interface property of carbon fibers/epoxy resin composite improved by hydrogen peroxide in supercritical water,” Materials Letters, vol. 63, no. 17, pp. 1531–1534, 2009. View at Publisher · View at Google Scholar · View at Scopus
  5. X. Zhang, Y. Wang, C. Lu, and S. Cheng, “Interfacial adhesive study on UHMWPE fiber-reinforced composites,” Polymer Bulletin, vol. 67, no. 3, pp. 527–540, 2011. View at Publisher · View at Google Scholar · View at Scopus
  6. Y. Liu and S. Kumar, “Recent progress in fabrication, structure, and properties of carbon fibers,” Polymer Reviews, vol. 52, no. 3-4, pp. 234–258, 2012. View at Publisher · View at Google Scholar · View at Scopus
  7. N. G. Ozdemir, T. Zhang, I. Aspin, F. Scarpa, H. Hadavinia, and Y. Song, “Toughening of carbon fibre reinforced polymer composites with rubber nanoparticles for advanced industrial applications,” Express Polymer Letters, vol. 10, no. 5, pp. 394–407, 2016. View at Publisher · View at Google Scholar · View at Scopus
  8. C. Velasco-Santos, A. L. Martinez-Hernandez, and V. M. Castano, “Carbon nanotube-polymer nanocomposites: the role of interfaces,” Composite Interfaces, vol. 11, no. 8-9, pp. 567–586, 2005. View at Publisher · View at Google Scholar · View at Scopus
  9. P. K. Agnihotri, K. K. Kar, and S. Basu, “Cohesive zone model of carbon nanotube-coated carbon fiber/polyester composites,” Modelling and Simulation in Materials Science and Engineering, vol. 20, no. 3, Article ID 035014, 2012. View at Publisher · View at Google Scholar · View at Scopus
  10. B. Barua and M. C. Saha, “Ultrasound assisted hybrid carbon epoxy composites containing carbon nanotubes,” Journal of Engineering Materials and Technology, vol. 135, no. 1, Article ID 011009, 2013. View at Publisher · View at Google Scholar · View at Scopus
  11. E. Moaseri, M. Karimi, M. Maghrebi, and M. Baniadam, “Fabrication of multi-walled carbon nanotube-carbon fiber hybrid material via electrophoretic deposition followed by pyrolysis process,” Composites Part A, vol. 60, pp. 8–14, 2014. View at Publisher · View at Google Scholar · View at Scopus
  12. A. Navarro de Miranda, L. C. Pardini, C. A. Moreira dos Santos, and R. Vieira, “Evaluation of carbon fiber composites modified by in situ incorporation of carbon nanofibers,” Materials Research, vol. 14, no. 4, pp. 560–563, 2011. View at Publisher · View at Google Scholar · View at Scopus
  13. W. Yang, R. Luo, Z. Hou, and H. Shang, “A novel preparation and properties of in-situ grown carbon nanotube reinforced carbon/carbon composites,” Vacuum, vol. 132, pp. 95–105, 2016. View at Publisher · View at Google Scholar · View at Scopus
  14. S. P. Sharma and S. C. Lakkad, “Effect of CNTs growth on carbon fibers on the tensile strength of CNTs grown carbon fiber-reinforced polymer matrix composites,” Composites Part A, vol. 42, no. 1, pp. 8–15, 2011. View at Publisher · View at Google Scholar · View at Scopus
  15. T. R. Pozegic, J. V. Anguita, I. Hamerton et al., “Multi-functional carbon fibre composites using carbon nanotubes as an alternative to polymer sizing,” Scientific Report, vol. 6, no. 1, Article ID 37334, 2016. View at Publisher · View at Google Scholar · View at Scopus
  16. T. Yan, L. Li, and L. Wang, “A simple nickel activation process for electroless nickel-phosphorus plating on carbon fiber,” BioResources, vol. 8, no. 1, pp. 340–349, 2013. View at Publisher · View at Google Scholar
  17. S. J. Park, Y. S. Jang, and K. Y. Rhee, “Interlaminar and ductile characteristics of carbon fibers-reinforced plastics produced by nanoscaled electroless nickel plating on carbon fiber surfaces,” Journal of Colloid and Interface Science, vol. 245, no. 2, pp. 383–390, 2002. View at Publisher · View at Google Scholar · View at Scopus
  18. F. Bottger-Hiller, J. Kleiber, T. Bottger, and T. Lampke, “Multimetallic electrodeposition on carbon fibers,” Materials Science and Engineering, vol. 118, Article ID 012027, 2016. View at Publisher · View at Google Scholar · View at Scopus
  19. S. J. Park and Y. S. Jang, “Interfacial characteristics and fracture toughness of electrolytically Ni-plated carbon fiber-reinforced phenolic resin matrix composites,” Journal of Colloid and Interface Science, vol. 237, no. 1, pp. 91–97, 2001. View at Publisher · View at Google Scholar · View at Scopus
  20. E. J. Garcia, B. L. Wardle, and A. J. Hart, “Joining prepreg composite interfaces with aligned carbon nanotubes,” Composites Part A, vol. 39, no. 6, pp. 1065–1070, 2008. View at Publisher · View at Google Scholar · View at Scopus
  21. E. Soliman, U. Kandil, and M. R. Taha, “Improved strength and toughness of carbon woven fabric composites with functionalized MWCNTs,” Materials, vol. 7, no. 6, pp. 4640–4657, 2014. View at Publisher · View at Google Scholar · View at Scopus
  22. Z. Dai, F. Shi, B. Zhang, M. Li, and Z. Zhang, “Effect of sizing on carbon fiber surface properties and fibers/epoxy interfacial adhesive,” Applied Surface Science, vol. 257, no. 15, pp. 6980–6985, 2011. View at Publisher · View at Google Scholar · View at Scopus
  23. Y. Zhou, F. Pervin, S. Jeelani, and P. K. Mallick, “Improvement in mechanical properties of carbon fabric-epoxy composite using carbon nanofibers,” Journal of Materials Processing Technology, vol. 198, no. 1–3, pp. 445–453, 2008. View at Publisher · View at Google Scholar · View at Scopus
  24. L. Y. Yao, M. Li, Q. Wu et al., “Comparison of sizing effect of T7000 grade carbon fiber on interfacial properties of fiber/BMI and fiber/epoxy,” Applied Surface Science, vol. 263, pp. 326–333, 2012. View at Publisher · View at Google Scholar · View at Scopus
  25. R. E. Tucker, “81st universal metal finishing guidebook,” Metal Finishing Magazine, vol. 111, no. 7, p. 415, 2013. View at Google Scholar
  26. A. M. F. Dehkharghani and M. Divandari, “Investigation of electroless copper plating on polyurethane foam, as an initial step of open cell foam production process,” Transactions of the Institute of Materials Finishing (IMF), vol. 93, no. 4, pp. 186–189, 2015. View at Publisher · View at Google Scholar · View at Scopus
  27. H. Chen, G. Liu, C. Xu, X. Hou, and Y. Liu, “Copper@carbon fiber composites prepared by a simple electroless plating technique,” Materials Letters, vol. 173, pp. 211–213, 2016. View at Publisher · View at Google Scholar · View at Scopus
  28. E. Soliman, M. Al-Haik, and M. R. Taha, “On and off-axis tension behavior of fiber reinforced polymer composites incorporating multi-walled carbon nanotubes,” Journal of Composites Materials, vol. 46, no. 14, pp. 1661–1675, 2011. View at Publisher · View at Google Scholar · View at Scopus
  29. KS M ISO 527–2, Plastics–Determination of Tensile Properties–Part 2: Test Conditions for Moulding and Extrusion Plastics, Korean Standard Association, Seoul, South Korea, 2013.
  30. KS L 2522, Test Methods for Carbon Fibre Woven Fabrics, Korean Standard Association, Seoul, South Korea, 2014.
  31. KS M ISO 527–4, Plastics–Determination of Tensile Properties–Part 4: Test Conditions for Isotropic and Orthotropic Fibre–Reinforced Plastic Composites, Korean Standard Association, Seoul, South Korea, 2012.
  32. J. Jiang, C. Xu, Y. Su et al., “Influence of carbon nanotube coatings on carbon fiber by ultrasonically assisted electrophoretic deposition on its composite interfacial properties,” Polymers, vol. 8, no. 8, pp. 302–312, 2016. View at Publisher · View at Google Scholar · View at Scopus
  33. J. Gou, C. Lu, and F. An, “Effect of electrophoretically deposited carbon nanotubes on the interface of carbon fiber reinforced epoxy composite,” Journal of Materials Science, vol. 47, no. 6, pp. 2831–2836, 2012. View at Publisher · View at Google Scholar · View at Scopus
  34. G. Zhang, J. Karger-Kocsis, and J. Zou, “Synergetic effect of carbon nanofibers and short carbon fibers on the mechanical and fracture properties of epoxy resin,” Carbon, vol. 48, no. 15, pp. 4289–4300, 2010. View at Publisher · View at Google Scholar · View at Scopus
  35. N. Yu and Y. W. Chang, “Effects of CNT diameter on the uniaxial stress-strain behavior of CNT/epoxy composites,” Journal of Nanomaterials, vol. 2008, Article ID 834248, 6 pages, 2008. View at Publisher · View at Google Scholar · View at Scopus
  36. R. J. Mora, J. J. Vilatela, and A. H. Windle, “Properties of composites of carbon nanotube fibers,” Composites Science and Technology, vol. 69, no. 10, pp. 1558–1563, 2009. View at Publisher · View at Google Scholar · View at Scopus
  37. S. Rahmanian, A. R. Suraya, M. A. Shazed, R. Zahari, and E. S. Zainudin, “Mechanical characterization of epoxy composite with multiscale reinforcements: carbon nanotubes and short carbon fibers,” Materials and Design, vol. 60, pp. 34–40, 2014. View at Publisher · View at Google Scholar · View at Scopus
  38. A. Martone, C. Formicola, M. Glordano, and M. Zarrelli, “Reinforcement efficiency of multi-walled carbon nanotube/epoxy nanocomposites,” Composites Science and Technology, vol. 70, no. 7, pp. 1154–1160, 2010. View at Publisher · View at Google Scholar · View at Scopus
  39. E. Kandare, A. A. Khatibi, S. Yoo et al., “Improving the through-thickness thermal and electrical conductivity of carbon fibre/epoxy laminates by exploiting synergy between grapheme and silver nano-inclusions,” Composites Part A, vol. 69, pp. 72–82, 2015. View at Publisher · View at Google Scholar · View at Scopus
  40. L. Dong, F. Hou, Y. Li, L. Wang, H. Gao, and Y. Tang, “Preparation of continuous carbon nanotube networks in carbon fiber/epoxy composite,” Composites Part A, vol. 56, pp. 248–255, 2014. View at Publisher · View at Google Scholar · View at Scopus
  41. L. Yan and N. Chouw, “Experimental study of flax FRP tube encased coir fibre reinforced concrete composite column,” Construction and Building Materials, vol. 40, pp. 1118–1127, 2013. View at Publisher · View at Google Scholar · View at Scopus