Research Article
Computer Numerical Controlled Grinding and Physical Vapor Deposition for Fused Deposition Modelled Workpieces
Table 1
Theoretical, real, postfinishing, and postPVD treatment dimensions.
| Test piece | Dimensional features | Theoretical dimensions (mm) | Raw part dimensions (mm) | Standard deviation raw part dimensions (mm) | Postfinishing dimensions (grinding A, sandblasting B) (mm) | Standard deviation postfinishing (mm) | Post-PVD dimensions (mm) | Standard deviation Post-PVD dimensions (mm) | Metal-coated dimensional differences to raw part (mm) | % | Metal-coated dimensional differences to CAD model (mm]) | Metal-coated dimensional differences to CAD model (%) |
| A | Length | 55.00 | 54.80 | 0.11 | 54.73 | 0.13 | 54.87 | 0.40 | 0.07 | 0.13 | −0.13 | −0.24 | Width | 50.00 | 49.79 | 0.071 | 49.58 | 0.64 | 49.73 | 0.33 | −0.06 | −0.12 | −0.27 | −0.53 | Height | 35.00 | 34.89 | 0.21 | 34.79 | 0.59 | 34.88 | 0.57 | −0.01 | −0.04 | −0.12 | −0.36 | Curve surface width | 30.00 | 29.89 | 0.32 | 29.99 | 0.32 | 29.83 | 0.49 | −0.06 | −0.18 | −0.17 | −0.56 |
| B | Length | 55.00 | 54.72 | 0.24 | x | x | 55.29 | 0.17 | 0.57 | 1.04 | 0.29 | 0.52 | Width | 50.00 | 49.86 | 0.24 | x | x | 50.40 | 0.21 | 0.54 | 1.08 | 0.40 | 0.79 | Height | 35.00 | 35.08 | 0.35 | x | x | 35.74 | 0.22 | 0.66 | 1.88 | 0.74 | 2.08 | Curve surface width | 30.00 | 29.99 | 0.43 | x | x | 29.28 | 0.67 | −0.71 | −2.35 | −0.72 | −2.45 |
|
|
x: the results of machinings performed by FORTEX.
|