Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2018, Article ID 9368787, 12 pages
https://doi.org/10.1155/2018/9368787
Research Article

Physical and Mechanical Properties of Cemented Ash-Based Lightweight Building Materials with and without Pumice

1Department of Environmental Engineering, Niğde Ömer Halisdemir University, 51240 Niğde, Turkey
2ÇİMSA Cement Industry and Trade Inc. Co. Niğde Plant, Hacı Sabancı Avenue, Niğde, Turkey
3Department of Civil Engineering, Niğde Ömer Halisdemir University, 51240 Niğde, Turkey

Correspondence should be addressed to Neslihan Doğan-Sağlamtimur; moc.liamg@rumitmalgasnagodnahilsen

Received 8 November 2017; Revised 15 February 2018; Accepted 26 February 2018; Published 2 April 2018

Academic Editor: Cristina Leonelli

Copyright © 2018 Neslihan Doğan-Sağlamtimur et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. N. Doğan-Sağlamtimur, A. Bilgil, M. Demir et al., “A reuse study from Niğde, Turkey: the conversion of industrial ash to geopolymer,” Desalination and Water Treatment, vol. 57, no. 6, pp. 2604–2615, 2016. View at Publisher · View at Google Scholar · View at Scopus
  2. B. Postacıoğlu, “Beton Bağlayıcı Maddeler,” cilt 1, Teknik Kitaplar Yayınevi, İstanbul, 1986. View at Google Scholar
  3. H. Yazıcı, Termik Santral Atiği Yapay Alçi-Uçucu Kül-Taban Külü Esasli Yapi Malzemesi Geliştirilmesi, Dokuz Eylül Üniversitesi, Fen Bilimleri Enstitüsü Doktora Tezi, İzmir, Turkey, 2004.
  4. N. Doğan-Sağlamtimur, A. Bilgil, T. Cila et al., “Niğde fabrikası kazan altı küllerinden çimento bağlayıcılı hafif yapı elemanı üretimi,” Çevre Bilim ve Teknoloji, vol. 1, pp. 50–57, 2016. View at Google Scholar
  5. INTES, Türkiye İnşaat Sanayicileri İşveren Sendikası İnşaat Sektörü Raporu Mart, 2014, http://www.intes.org.tr/content/MArt-2014.pdf.
  6. İ. Yüksel, Ö. Özkan, and T. Bilir, “Kazanaltı külü ile briket üretimi,” Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi, vol. 21, no. 3, pp. 527–532, 2006. View at Google Scholar
  7. R. Siddique, “Utilization of coal combustion by-products in sustainable construction materials,” Resources, Conservation and Recycling, vol. 54, no. 12, pp. 1060–1066, 2010. View at Publisher · View at Google Scholar · View at Scopus
  8. M. L. D. Jayaranjan, E. D. van Hullebusch, and A. P. Annachhatre, “Reuse options for coal fired power plant bottom ash and fly ash,” Reviews in Environmental Science and Bio/Technology, vol. 13, no. 4, pp. 467–486, 2014. View at Publisher · View at Google Scholar · View at Scopus
  9. Y. Bai, F. Darcy, and P. A. M. Basheer, “Strength and drying shrinkage properties of concrete containing furnace bottom ash as fine aggregate,” Construction and Building Materials, vol. 19, no. 9, pp. 691–697, 2005. View at Publisher · View at Google Scholar · View at Scopus
  10. İ. Yüksel, T. Bilir, and Ö. Özkan, “Durability of concrete incorporating non-ground blast furnace slag and bottom ash as fine aggregate,” Building and Environment, vol. 42, no. 7, pp. 2651–2659, 2007. View at Publisher · View at Google Scholar · View at Scopus
  11. K. Nataraj, S. M. Midun, K. M. Hari, G. M. Ganesh, and A. S. Santhi, “Bottom ash concrete,” International Journal of Advanced Research in Mechanical and Production Engineering and Development, vol. 1, no. 1, pp. 6–11, 2013. View at Google Scholar
  12. E. Sancak and A. Şamandar, “The role of usage of self-consolidating concrete with regard to sustainability,” in Proceedings of International Sustainable Building Symposium, pp. 134–140, Ankara, Turkey, May 2010.
  13. İ. Bentli, A. O. Uyanık, U. Demir, O. Şahbaz, and M. S. Çelik, “Seyitömer termik santrali uçucu küllerinin tuğla katki hammaddesi olarak kullanimi,” in Türkiye 19, Uluslararası Madencilik Kongresi ve Fuarı, pp. 385–389, İzmir, Turkey, Haziran 2005.
  14. D. Alkaya, “Uçucu küllerin zemin iyileştirmesinde kullanılmasının incelenmesi,” Yapı Teknolojileri Elektronik Dergisi, vol. 5, no. 81, pp. 61–72, 2009. View at Google Scholar
  15. N. Phonphuak, S. Kanyakam, and P. Chindaprasirt, “Utilization of waste glass to enhance physical and mechanical properties of fired clay brick,” Journal of Cleaner Production, vol. 112, pp. 3057–3062, 2016. View at Publisher · View at Google Scholar · View at Scopus
  16. P. A. M. Basheer, P. R. V. Gilleece, A. E. Long, and W. J. Mc Carter, “Monitoring electrical resistance of concretes containing alternative cementitious materials to assess their resistance to chloride penetration,” Cement and Concrete Composites, vol. 24, no. 5, pp. 437–449, 2002. View at Publisher · View at Google Scholar · View at Scopus
  17. J. Deja, “Freezing and de-icing salt resistance of blast furnace slag concretes,” Cement and Concrete Composites, vol. 25, no. 3, pp. 357–361, 2003. View at Publisher · View at Google Scholar · View at Scopus
  18. O. Ünal, A. Ergün, T. Uygunoğlu, and G. Kürklü, Hafif Agregalı Elemanların Fiziko-Mekanik Özelliklerin Araştırılması ve Modellenmesi, Project No: 109M391, TÜBİTAK, Ankara, Turkey, 2008.
  19. Ş. G. Özkan and G. Tuncer, “Pomza madenciliğine genel bir bakiş,” in 4. Endüstriyel Hammaddeler Sempozyumu, pp. 200–207, İzmir, Turkey, Ekim 2001.
  20. İ. Demir, M. S. Başpınar, G. Görhan, E. Kahraman, and O. Akyol, “Pomza agregali hafif beton isil özelliklerine polistiren köpük ve uçucu kül katkisini etkileri, x. ulusal tesisat mühendisliği kongresi,” in Binalarda Enerji Performansı Sempozyumu, pp. 911–916, İzmir, Turkey, Nisan 2011.
  21. O. Ünal, İ. Demir, and T. Uygunoğlu, “Pomza ve diyatomitin hafif blok eleman üretiminde kullanilmasinin araştirilması,” in III. Ulusal Kırmataş Sempozyumu, pp. 107–113, İstanbul, Turkey, Aralık 2003.
  22. M. Eriç, Yapı Fiziği ve Malzemesi, Literatür Yayıncılık, İstanbul, Turkey, 1994.
  23. X. C. Qiao, B. R. Ng, M. Tyrer, C. S. Poon, and C. R. Cheeseman, “Production of lightweight concrete using incinerator bottom ash,” Construction and Building Materials, vol. 22, no. 4, pp. 473–480, 2008. View at Publisher · View at Google Scholar · View at Scopus
  24. W. Wongkeo and A. Chaipanich, “Compressive strength, microstructure and thermal analysis of autoclaved and air cured structural lightweight concrete made with coal bottom ash and silica fume,” Materials Science and Engineering A, vol. 527, no. 16-17, pp. 3676–3684, 2010. View at Publisher · View at Google Scholar · View at Scopus
  25. L. Blomqvist, A. Pfriem, and J. Johansson, “Temporary buildings in reusable lightweight material design,” in Proceedings of World Conference on Timber Engineering, Vienna, Austria, August 2016.
  26. TS 3234, Bimsbeton Yapım Kuralları, Karışım Hesabı ve Deney Metotları, Türk Standartları Enstitüsü (Mining, placing, curing, mix design and methods of testing of pumice concrete), Turkish Standards Institution (TSE), Ankara, Turkey, 2005.