Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2018 (2018), Article ID 9512957, 12 pages
https://doi.org/10.1155/2018/9512957
Research Article

Influence of Thermal Parameters, Microstructure, and Morphology of Si on Machinability of an Al–7.0 wt.% Si Alloy Directionally Solidified

1Federal University of Pará, Augusto Correa Avenue 01, P.O. Box 479, Belém, PA, Brazil
2Federal Institute of Education, Science and Technology of Pará, Almirante Barroso Avenue 1155, P.O. Box 66093-020, Belém, PA, Brazil

Correspondence should be addressed to Adrina P. Silva; moc.liamg@callitseairam

Received 16 August 2017; Accepted 20 February 2018; Published 3 April 2018

Academic Editor: Patrice Berthod

Copyright © 2018 Cássio A. P. Silva et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. F. R. Faustino, J. O. Santos, and I. F. Machado, Método para ensaios de avaliação de usinabilidade de materiais metálicos utilizando torno CNC e torno convencional (mecânico), in VIII Encontro de Iniciação Científica do LFS, 2007.
  2. M. B. Tessler and C. A. Barbosa, “A usinabilidade dos aços inoxidáveis,” Metalurgia e Materiais, vol. 49, no. 413, pp. 32–41, 1993. View at Google Scholar
  3. D. O’Sullivan and M. Cotterell, “Temperature measurement in single point turning,” Journal of Materials Processing Technology, vol. 118, no. 1–3, pp. 301–308, 2001. View at Google Scholar
  4. F. W. Taylor, “On the art of cutting metals,” ASME Transactions, vol. 28, p. 31, 1907. View at Google Scholar
  5. K. J. Trigger and B. T. Chao, “An analytical evaluation of metal-cutting temperatures,” ASME Transactions, vol. 78, p. 57, 1951. View at Google Scholar
  6. M. A. Taha, N. A. El-Mahallawy, R. M. Hammouda, T. M. Moussa, and M. H. Gheith, “Machinability characteristics of lead free-silicon brass alloys as correlated with microstructure and mechanical properties,” Ain Shams Engineering Journal, vol. 3, no. 4, pp. 383–392, 2012. View at Publisher · View at Google Scholar · View at Scopus
  7. M. A. Davies, T. Ueda, R. M’Saoubi, B. Mullany, and A. L. Cooke, “On the measurement of temperature in material removal processes,” CIRP Annals, vol. 56, no. 2, pp. 581–604, 2007. View at Publisher · View at Google Scholar · View at Scopus
  8. N. A. Abukhshim, P. T. Mativenga, and M. A. Sheikh, “Heat generation and temperature prediction in metal cutting: a review and implications for high speed machining,” International Journal of Machine Tools and Manufacture, vol. 46, no. 7-8, pp. 782–800, 2006. View at Publisher · View at Google Scholar · View at Scopus
  9. U. B. Souto, Monitoramento do Desgaste de Ferramenta no Processo de Fresamento Via Emissão Acústica, Universidade Federal de Uberlândia, Uberlândia, MG, Brazil, 2007.
  10. R. M. U. Nogueira, Obtenção e Estudo de Insertos Sinterizados de Aços Rápidos AISI M2, M3/2 E T15, UDESC, Joinville, SC, Brazil, 2004.
  11. D. W. Hetzner, “Refining carbide size distributions in M1 high speed steel by processing and alloying,” Materials Characterization, vol. 46, no. 2-3, pp. 175–182, 2001. View at Publisher · View at Google Scholar · View at Scopus
  12. E. M. Trent and P. K. Wright, Metal Cutting, Butterworth-Heineman, Boston, MA, USA, 2000.
  13. C. Zimmerman, S. P. Boppana, and K. Katbi, “Machinability test methods,” in ASM Metals Handbook, vol. 10, ASM International, ASM International, Metals Park, OH, USA, 1990. View at Google Scholar
  14. J. M. V. Quaresma, C. A. Santos, and A. Garcia, “Correlation between unsteady-state solidification conditions, dendrite spacings, and mechanical properties of Al-Cu alloys,” Metallurgical and Materials Transactions A, vol. 31, no. 12, pp. 3167–3178, 2000. View at Publisher · View at Google Scholar
  15. A. Bahmani, N. Hatami, N. Varahram, P. Davami, and M. O. Shabani, “A mathematical model for prediction of microporosity in aluminum alloy A356,” International Journal of Advanced Manufacturing Technology, vol. 64, no. 9–12, pp. 1313–1321, 2013. View at Publisher · View at Google Scholar · View at Scopus
  16. T. A. Costa, A. L. Moreira, D. J. Mooutinho et al., “Growth direction and Si alloying affecting directionally solidified structures of Al–Cu–Si alloys,” Materials Science and Technology, vol. 31, no. 9, pp. 1103–1112, 2015. View at Publisher · View at Google Scholar · View at Scopus
  17. E. C. Araújo, A. S. Barros, R. H. Kikuchi et al., “The role of Si and Cu alloying elements on the dendritic growth and microhardness in horizontally solidified binary and multicomponent aluminum-based alloys,” Metallurgical and Materials Transactions A, vol. 48, no. 3, pp. 1163–1175, 2017. View at Publisher · View at Google Scholar · View at Scopus
  18. G. R. Santos, D. D. Costa, F. L. Amorim, and R. D. Torres, “Characterization of DLC thin film and evaluation of machining forces using coated inserts in turning of Al–Si alloys,” Surface and Coatings Technology, vol. 202, no. 4–7, pp. 1029–1033, 2007. View at Google Scholar
  19. H. Ye, “An overview of the development of Al-Si-alloy based material for engine applications,” Journal of Materials Engineering and Performance, vol. 12, no. 3, pp. 288–297, 2003. View at Google Scholar
  20. A. Bahmania, G. B. Eisaabadi, P. Davamia, N. Varahrama, and M. O. Shabanid, “Effects of hydrogen level and cooling rate on ultimate tensile strength of Al A319 alloy,” Russian Journal of Non-Ferrous Metals, vol. 55, no. 4, pp. 365–370, 2014. View at Publisher · View at Google Scholar · View at Scopus
  21. Y. Wang, B. Liu, J. Song, X. Yang, and K. Wu, Advanced Materials Research, vol. 381, p. 16, 2012.
  22. M. O. Shabani and A. Mazahery, “Prediction of mechanical properties of cast A356 alloy as a function of microstructure and cooling rate,” Archives of Metallurgy and Materials, vol. 56, no. 3, p. 671, 2011. View at Google Scholar
  23. A. Mazahery and M. O. Shabani, “Modification mechanism and microstructural characteristics of eutectic Si in casting Al-Si alloys: a review on experimental and numerical studies,” Journal of the Minerals, Metals, and Materials Society, vol. 66, no. 5, pp. 726–738, 2014. View at Publisher · View at Google Scholar · View at Scopus
  24. A. Mazahery and M. O. Shabani, “Process conditions optimization in Al–Cu alloy matrix composites,” Powder Technology, vol. 225, pp. 101–106, 2012. View at Publisher · View at Google Scholar · View at Scopus
  25. M. O. Shabani and A. Mazahery, “Artificial Intelligence in numerical modeling of nano sized ceramic particulates reinforced metal matrix composites,” Applied Mathematical Modelling, vol. 36, no. 11, pp. 5455–5465, 2012. View at Publisher · View at Google Scholar · View at Scopus
  26. M. O. Shabani and A. Mazahery, “Application of finite element model and artificial neural network in characterization of Al matrix nanocomposites using various training algorithms,” Metallurgical and Materials Transactions A, vol. 43, no. 6, pp. 2158–2165, 2012. View at Publisher · View at Google Scholar · View at Scopus
  27. A. Mazahery and M. O. Shabani, “A356 reinforced with nanoparticles: numerical analysis of mechanical properties,” JOM, vol. 64, no. 2, pp. 323–329, 2012. View at Publisher · View at Google Scholar · View at Scopus
  28. M. O. Shabani and A. Mazahery, “Optimization of process conditions in casting aluminum matrix composites via interconnection of artificial neurons and progressive solutions,” Ceramics International, vol. 38, no. 6, pp. 4541–4547, 2012. View at Publisher · View at Google Scholar · View at Scopus
  29. M. O. Shabani and A. Mazahery, Materials and Technology, vol. 46, p. 2, 2012.
  30. S. Z. Lu and A. Hellawell, “The mechanism of silicon modification in aluminum-silicon alloys: impurity induced twinning,” Metallurgical Transactions A, vol. 18, no. 10, pp. 1721–1733, 1987. View at Google Scholar
  31. N. R. Rathod and J. V. Manghani, “Effect of modifier and grain refiner on cast Al-7Si aluminum alloy: a review,” International Journal of Emerging Trends in Engineering and Development, vol. 5, p. 574, 2012. View at Google Scholar
  32. E. T. S. Gandini, B. M. C. Donadoni, A. I. S. Antonialli, and J. E. Spinelli, in 22nd International Congress of Mechanical Engineering (COBEM 2013), RibeirãoPreto, 2004.
  33. E. Çadirli, “Effect of solidification parameters on mechanical properties of directionally solidified Al-Rich Al-Cu alloys,” Metals and Materials International, vol. 19, no. 3, pp. 411–422, 2013. View at Publisher · View at Google Scholar · View at Scopus
  34. H. Kaya, U. Boyuk, E. Çadirli, and N. Marasli, “Influence of growth rate on microstructure, microhardness, and electrical resistivity of directionally solidified Al-7 wt.% Ni hypo-eutectic alloy,” Metals and Materials International, vol. 19, no. 1, pp. 39–44, 2013. View at Google Scholar
  35. D. M. Rosa, J. E. Spinelli, and A. Garcia, “Tertiary dendrite arm spacing during downward transient solidification of Al–Cu and Al–Si alloys,” Materials Letters, vol. 60, no. 15, pp. 1871–1874, 2006. View at Publisher · View at Google Scholar · View at Scopus
  36. A. P. Silva, A. Garcia, and J. E. Spinelli, “Microstructure morphologies during the transient solidification of hypomonotectic and monotectic Al–Pb alloys,” Journal of Alloys and Compounds, vol. 509, no. 41, pp. 10098–10104, 2011. View at Publisher · View at Google Scholar · View at Scopus
  37. J. N. Silva, D. J. Moutinho, A. L. Moreira, I. L. Ferreira, and O. L. Rocha, “The columnar to equiaxed transition during the horizontal directional solidification of Sn–Pb alloys,” Journal of Alloys and Compounds, vol. 478, no. 1-2, pp. 358–366, 2009. View at Publisher · View at Google Scholar · View at Scopus
  38. J. N. Silva, D. J. Moutinho, A. L. Moreira, I. L. Ferreira, and O. L. Rocha, “Determination of heat transfer coefficients at metal–mold interface during horizontal unsteady-state directional solidification of Sn–Pb alloys,” Materials Chemistry and Physics, vol. 130, no. 1-2, pp. 179–185, 2011. View at Publisher · View at Google Scholar · View at Scopus
  39. J. H. Sokołowski, D. Szablewski, W. Kasprzak, E. G. Ng, and M. Dumi-Trescu, Journal of Achievements in Materials and Manufacturing Engineering, vol. 17, p. 15, 2006.
  40. Y. Zedan, F. H. Samuel, A. M. Samuel, and H. W. Doty, “Effects of Fe intermetallics on the machinability of heat-treated Al–(7–11)% Si alloys,” Journal of Materials Processing Technology, vol. 210, no. 2, pp. 245–257, 2010. View at Publisher · View at Google Scholar · View at Scopus
  41. A. P. Silva, I. R. Prado, J. S. Barros, C. A. P. Silva, A. L. Moreira, and O. L. Rocha, “Influence of growth rate on microstructure, microhardness, and electrical resistivity of directionally solidified Al-7 wt.% Ni hypo-eutectic alloy,” Defect and Diffusion Forum, vol. 365, pp. 116–121, 2015. View at Google Scholar
  42. D. B. Carvalho, A. L. Moreira, D. J. Moutinho, J. M. Filho, O. L. Rocha, and J. E. Spinelli, “The columnar to equiaxed transition of horizontal unsteady-state directionally solidified Al-Si alloys,” Materials Research, vol. 17, no. 2, pp. 498–510, 2014. View at Publisher · View at Google Scholar · View at Scopus
  43. D. B. Carvalho, T. A. Costa, A. L. Moreira et al., “Solidification thermal parameters and dendritic growth during the horizontal directional solidification of Al-7wt.%Si alloy,” Revista Escola de Minas, vol. 67, no. 3, pp. 265–270, 2014. View at Publisher · View at Google Scholar
  44. M. D. Peres, C. A. Siqueira, and A. Garcia, “Macrostructural and microstructural development in Al–Si alloys directionally solidified under unsteady-state conditions,” Journal of Alloys and Compounds, vol. 381, no. 1-2, pp. 168–181, 2004. View at Publisher · View at Google Scholar · View at Scopus
  45. O. L. Rocha, C. A. Siqueira, and A. Garcia, “Cellular spacings in unsteady-state directionally solidified Sn–Pb alloys,” Materials Science and Engineering: A, vol. 361, no. 1-2, pp. 111–118, 2003. View at Publisher · View at Google Scholar · View at Scopus
  46. A. R. Machado, A. M. Abrão, R. T. Coelho, and M. B. Silva, Teoria da Usinagem dos Materiais, Edgard Blucher, Jardim Paulista, SP, Brazil, 2011.
  47. M. B. Silva and J. Wallbank, “Cutting temperature: prediction and measurement methods—a review,” Journal of Materials Processing Technology, vol. 88, no. 1–3, pp. 195–202, 1999. View at Google Scholar
  48. ISO 3685, Tool-Life Testing with Single-Point Turning Tools, 1993.
  49. B. Haddag and M. Nouari, “Tool wear and heat transfer analyses in dry machining based on multi-steps numerical modelling and experimental validation,” Wear, vol. 302, no. 1-2, pp. 1158–1170, 2013. View at Publisher · View at Google Scholar · View at Scopus