Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2018, Article ID 9807140, 30 pages
https://doi.org/10.1155/2018/9807140
Research Article

Experimental Investigation on Flexural Behavior of Granite Stone Slabs with Near Surface Mounted CFRP Bars and Screw-Thread Steels

1Key Laboratory of RC and PC Structures of Ministry of Education, Southeast University, Nanjing 210096, China
2Nanjing Yangtze River Urban Architectural Design Co. Ltd., 328 Hongwu Road, Nanjing 210000, China

Correspondence should be addressed to Zhongfan Chen; nc.ude.ues@449300101

Received 8 January 2018; Revised 26 March 2018; Accepted 2 April 2018; Published 26 April 2018

Academic Editor: Andres Sotelo

Copyright © 2018 Xiaopeng Gao et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. D. L. Lorenzis and A. Nanni, “Characterization of FRP rods as near-surface mounted reinforcement,” Journal of Composites for Construction, vol. 5, no. 2, pp. 114–121, 2001. View at Publisher · View at Google Scholar · View at Scopus
  2. D. L. Lorenzis and A. Nanni, “Shear strengthening of reinforced concrete beams with near-surface mounted fiber-reinforced polymer rods,” ACI Structural Journal, vol. 98, pp. 60–68, 2001. View at Google Scholar
  3. V. Turco, S. Secondin, A. Morbin, M. R. Valluzzi, and C. Modena, “Flexural and shear strengthening of unreinforced masonry with FRP bars,” Composites Science and Technology, vol. 66, no. 2, pp. 289–296, 2006. View at Publisher · View at Google Scholar · View at Scopus
  4. X. Qingfeng, C. Lingzhu, K. A. Harries, Z. Fuwen, W. Zhuolin, and C. Xi, “Experimental study and numerical simulation of long-term behavior of timber beams strengthened with near surface mounted CFRP bars,” Materials and Structures, vol. 50, no. 1, p. 45, 2017. View at Publisher · View at Google Scholar · View at Scopus
  5. Y. Wei, M. Q. Zhou, and D. J. Chen, “Flexural behavior of glulam bamboo beams reinforced with near-surface mounted steel bars,” Materials Research Innovations, vol. 19, no. 1, pp. S98–S103, 2015. View at Publisher · View at Google Scholar · View at Scopus
  6. E. I. Saqana, H. A Rasheed, and T. Alkhrdaji, “Evaluation of the seismic performance of reinforced concrete frames strengthened with CFRP fabric and NSM bars,” Composite Structures, vol. 184, pp. 839–847, 2018. View at Publisher · View at Google Scholar · View at Scopus
  7. S. O. Asplund, “Strengthening bridge slabs with grouted reinforcement,” Journal of the American Concrete Institute, vol. 20, pp. 397–406, 1949. View at Google Scholar
  8. S. W. Garrity, “Near-surface reinforcement of masonry arch highway bridges,” in Proceedings of the 9th Canadian Masonry Symposium, Fredericton, Canada, June 2001.
  9. J. M. D. S. Cruz and J. A. O. D. Barros, “Bond between near-surface mounted carbon-fiber-reinforced polymer laminate strips and concrete,” Journal of Composites for Construction, vol. 8, no. 6, pp. 519–527, 2004. View at Publisher · View at Google Scholar · View at Scopus
  10. T. Hassan and S. Rizkalla, “Investigation of bond in concrete structures strengthened with near surface mounted carbon fiber reinforced polymer strips,” Journal of Composites for Construction, vol. 7, no. 3, pp. 248–257, 2003. View at Publisher · View at Google Scholar · View at Scopus
  11. L. D. Lorenzis, A. Rizzo, and A. L. Tegola, “A modified pull-out test for bond of near-surface mounted FRP rods in concrete,” Composites Part B: Engineering, vol. 33, no. 8, pp. 589–603, 2002. View at Publisher · View at Google Scholar · View at Scopus
  12. G. Sakara, R. A. Hawileh, M. Z. Naser, J. A. Abdalla, and M. Tanarslan, “Nonlinear behavior of shear deficient RC beams strengthened with near surface mounted glass fiber reinforcement under cyclic loading,” Materials and Design, vol. 61, pp. 16–25, 2014. View at Publisher · View at Google Scholar · View at Scopus
  13. K. M. U. Darain and H. Akter, “Strengthening of RC beams using externally bonded reinforcement combined with near-surface mounted technique,” Polymers, vol. 8, no. 7, p. 261, 2016. View at Publisher · View at Google Scholar · View at Scopus
  14. R. Kotynia and S. Cholostiakow, “New proposal for flexural strengthening of reinforced concrete beams using CFRP T-shaped profiles,” Polymers, vol. 7, no. 11, pp. 2461–2477, 2015. View at Publisher · View at Google Scholar · View at Scopus
  15. H. A. Rasheed, R. R. Harrison, R. J. Peterman et al., “Ductile strengthening using externally bonded and near surface mounted composite systems,” Composite Structures, vol. 92, no. 10, pp. 2379–2390, 2010. View at Publisher · View at Google Scholar · View at Scopus
  16. R. A. Hawileh, “Nonlinear finite element modeling of RC beams strengthened with NSM FRP rods,” Construction and Building Materials, vol. 27, no. 1, pp. 461–471, 2012. View at Publisher · View at Google Scholar · View at Scopus
  17. L. D. Lorenzis and J. G. Teng, “Near-surface mounted FRP reinforcement: an emerging technique for strengthening structures,” Composites Part B: Engineering, vol. 38, no. 2, pp. 119–143, 2007. View at Publisher · View at Google Scholar · View at Scopus
  18. P. Azadeh and S. S. Taqiuddin, “Fiber reinforced polymer strengthening of structures by near-surface mounting method,” Polymers, vol. 8, no. 8, p. 298, 2016. View at Publisher · View at Google Scholar · View at Scopus
  19. R. Elhacha and K. Soudki, “Prestressed near-surface mounted fiber reinforced polymer reinforcement for concrete structures a review,” Canadian Journal of Civil Engineering, vol. 40, no. 11, pp. 1127–1139, 2013. View at Publisher · View at Google Scholar · View at Scopus
  20. R. Parretti and A. Nanni, “Strengthening of RC members using near-surface mounted FRP composites design overview,” Advances in Structural Engineering, vol. 7, no. 6, pp. 469–483, 2004. View at Publisher · View at Google Scholar · View at Scopus
  21. China Industry Standard, Seismic Technical Specification for Building Construction in Town and Village, JGJ161–2008, China Architecture and Building Press, Beijing, China, 2011.
  22. China Industry Standard, Code for Seismic Design of Buildings, GB50003–2011, China Architecture and Building Press, Beijing, China, 2011.
  23. China Industry Standard, Code for Design of Masonry Structures, GB50003–2011, China Architecture and Building Press, Beijing, China, 2011.
  24. British Standard Institute (BSI), Testing Hardened Concrete, Tensile Splitting Strength of Test Specimens, BS EN 12390–6, BSI, London, UK, 2000.
  25. America Society for Testing and Materials (ASTM), Standard Test Method for Static Modulus of Elasticity and Poisson Ratio of Concrete in Compression, C469, ASTM, West Conshohocken, PA, USA, 2002.
  26. America Society for Testing and Materials (ASTM), Standard Test Methods and Definitions for Mechanical Testing of Steel Products, A370–17, ASTM, West Conshohocken, PA, USA, 2017.
  27. G. Zhenhai, Principles of Reinforced Concrete, Tsinghua University Press, Beijing, China, 1st edition, 2014.
  28. M. M. Rafi, A. Nadjai, F. Ali, and D. Talamona, “Aspects of behavior of CFRP reinforced concrete beams in bending,” Construction and Building Materials, vol. 22, no. 3, pp. 277–285, 2008. View at Publisher · View at Google Scholar · View at Scopus
  29. M. A. Hosen, U. J. Alengaram, M. Z. Jumaat, and N. H. R. Sulong, “Glass Fiber Reinforced Polymer (GFRP) bars for enhancing the flexural performance of RC beams using side-NSM technique,” Polymer, vol. 9, no. 12, p. 180, 2017. View at Publisher · View at Google Scholar
  30. M. Hosen, M. Jumaat, U. Alengaram, A. Islam, and H. Hashim, “Near surface mounted composites for flexural strengthening of reinforced concrete beams,” Polymer, vol. 8, no. 3, p. 67, 2016. View at Publisher · View at Google Scholar · View at Scopus