Research Article
[Retracted] Optimization on Operation Parameters in Reinforced Metal Matrix of AA6066 Composite with HSS and Cu
Table 2
Input parameters variation as per the L9 method.
| Specimen’s number | Pressure of cutting fluid, Pr (bar) | Feed, F (mm/rev) | Depth of cut, D (mm) |
| SN 1 | 3 | 0.1 | 0.3 | SN 2 | 3 | 0.15 | 0.6 | SN 3 | 3 | 0.2 | 0.9 | SN 4 | 6 | 0.1 | 0.6 | SN 5 | 6 | 0.15 | 0.9 | SN 6 | 6 | 0.2 | 0.3 | SN 7 | 9 | 0.1 | 0.9 | SN 8 | 9 | 0.15 | 0.3 | SN 9 | 9 | 0.2 | 0.6 |
|
|