The Influence of Mixing Orders on the Microstructure of Artificially Prepared Sand-Clay Mixtures

<table class="table-group" id="tab4"><tr><td><table class="table"><tr><td class="thead-hr" colspan="4"><hr/></td></tr><tr class="thead"><td class="align_left">Sample</td><td class="align_center">Porosity (%)</td><td class="align_center">Average pore diameter (4 V/A) (nm)</td><td class="align_center">Median pore diameter (V) (nm)</td></tr><tr><td class="thead-hr" colspan="4"><hr/></td></tr><tr><td class="align_left">S1</td><td class="align_center">28.1</td><td class="align_center">51.4</td><td class="align_center">360.9</td></tr><tr><td class="align_left">S2</td><td class="align_center">30.1</td><td class="align_center">58.4</td><td class="align_center">1041.3</td></tr><tr><td class="align_left">S3</td><td class="align_center">28.6</td><td class="align_center">54.6</td><td class="align_center">480.7</td></tr><tr class="table-tr"><td colspan="4"><hr class="tbody-hr"/></td></tr></table></td></tr></table>

<div>Porosity and pore throat diameters from the MIP tests for the samples prepared by the three protocols.</div>

Advances in Materials Science and Engineering

tab4

Table 4

Table 4: The Influence of Mixing Orders on the Microstructure of Artificially Prepared Sand-Clay Mixtures 