Research Article
Study on Injection Molding Process Simulation and Process Parameter Optimization of Automobile Instrument Light Guiding Support
Table 1
Simulation results of the four configurations.
| Gate number/a | Filling time/s | Temperature difference at the flow front/°C | Clamping force/kN | Characteristics of welding line |
| I | 1.444 | 3.7 | 1059 | The number of pieces is more and the length is larger | II | 1.291 | 11 | 907 | III | 1.304 | 20.2 | 821.2 | The number is less and the distribution is reasonable | IV | 1.055 | 7.4 | 1060 |
|
|