The Effect of Lay Length on the Antipull Performance of Steel Cords and the Spinning Loss Based on the FEM

<table class="table-group" id="tab4"><tr><td><table class="table"><tr><td class="thead-hr" colspan="3"><hr/></td></tr><tr class="thead"><td class="align_left">Steel cord type (mm)</td><td class="align_center">Simulated simulation break force (N)</td><td class="align_left">Breaking force test (N)</td></tr><tr><td class="thead-hr" colspan="3"><hr/></td></tr><tr><td class="align_left">0.26 + 6 × 0.24</td><td class="align_center">1037</td><td class="align_center">967</td></tr><tr><td class="align_left">0.28 + 6 × 0.26</td><td class="align_center">1192</td><td class="align_center">1214</td></tr><tr><td class="align_left">0.26 + 6 × 0.24</td><td class="align_center">1037</td><td class="align_center">967</td></tr><tr class="table-tr"><td colspan="3"><hr class="tbody-hr"/></td></tr></table></td></tr></table>

<div>Lay length p-7 mm steel cord break force simulation results compared with experimental results.</div>

Advances in Materials Science and Engineering

tab4

Table 4

Table 4: The Effect of Lay Length on the Antipull Performance of Steel Cords and the Spinning Loss Based on the FEM 