Research Article
Examination of Machining Parameters and Prediction of Cutting Velocity and Surface Roughness Using RSM and ANN Using WEDM of Altemp HX
Table 2
Experimental parameters used for investigation.
| Parameter | Level 1 | Level 2 | Level 3 | Level 4 | Level 5 |
| Pulse on time (μs) (Ton) | 105 | 110 | 115 | 120 | 125 | Wire span (mm) (WS) | 60 | 90 | 120 | 150 | 180 | Servo gap voltage (V) (SGV) | 35 | 40 | 45 | 50 | 55 |
|
|