Research Article
Examination of Machining Parameters and Prediction of Cutting Velocity and Surface Roughness Using RSM and ANN Using WEDM of Altemp HX
Table 5
Genetic algorithm optimization parameters.
| Sl. no. | Pulse on time | Wire span (WS) | Servo gap voltage (SGV) | Cutting velocity (mm/min) | Surface roughness (µm) | Experimental | Optimum | Experimental | Optimum |
| 1 | 105 | 81 | 53 | 0.54 | 0.501 | 1.52 | 1.566 |
|
|