Research Article
Research on Optimization of Injection Molding Process Parameters of Automobile Plastic Front-End Frame
Table 1
Gate analysis information and statistical table.
| Mesh size (mm) | 5 | 7 | 9 | 11 | 13 | 15 |
| Number of mesh (one) | 124335 | 64028 | 39901 | 27886 | 20868 | 16379 | Number of potential gates (one) | 60988 | 31159 | 19202 | 13305 | 9844 | 7645 | 6 gates analysis duration (s) | 3902 | 1501 | 875 | 575 | 420 | 305 | 7 gates analysis duration (s) | 5578 | 2510 | 1428 | 883 | 600 | 431 | 8 gate analysis duration (s) | 7715 | 3023 | 1758 | 1129 | 803 | 598 |
|
|