Research Article
Research on Optimization of Injection Molding Process Parameters of Automobile Plastic Front-End Frame
Table 3
Statistical table of volume shrinkage and warpage analysis results of different mesh sizes.
| Mesh size (mm) | Volume shrinkage (%) | Warpage (mm) |
| ā | 6 gates | 7 gates | 8 gates | 6 gates | 7 gates | 8 gates | 5 | 14.030 | 14.190 | 14.140 | 1.138 | 1.527 | 1.022 | 7 | 14.040 | 14.210 | 14.120 | 1.265 | 1.543 | 0.956 | 9 | 13.860 | 14.010 | 14.110 | 1.304 | 1.574 | 0.952 | 11 | 14.030 | 14.060 | 14.120 | 1.362 | 1.627 | 1.296 | 13 | 13.900 | 14.060 | 14.060 | 1.369 | 1.667 | 0.952 | 15 | 13.840 | 13.960 | 13.930 | 1.356 | 1.586 | 0.921 |
|
|