Research Article
Shrinkage and Warpage Mechanism of Overflow Water-Assisted Injection Molding Short Fiber-Reinforced Polymers
Table 3
Levels of factors used in experiments.
| Factors | Levels | 1 | 2 | 3 | 4 |
| A: water injection pressure (MPa) | 4 | 6 | 8 | 10 | B: water injection delay time (s) | 0 | 1 | 3 | 5 | C: melt temperature (°C) | 210 | 230 | 250 | 270 | D: mold temperature (°C) | 35 | 45 | 55 | 65 | E: fiber mass content (%) | 0 | 20 | 30 | 40 |
|
|