Research Article
DEFORM 3D Simulations and Taguchi Analysis in Dry Turning of 35CND16 Steel
Figure 3
Temperature generation in the machining zone. (a) Temperature: simulated at (V) 60 m/min, (S) 0 .15 mm/rev, ap: 0.75 mm (b) Temperature: simulated at (V) 120 m/min, (S) 0.25 mm/rev ap: 1.25 mm, and (c) Temperature: simulated at (V) 150 m/min, (S) 0.55 mm/rev ap: 1.00 mm.
| (a) |
| (b) |
| (c) |