Research Article
DEFORM 3D Simulations and Taguchi Analysis in Dry Turning of 35CND16 Steel
Table 1
Factors for experiments and simulation.
| S.No | Variables/factors | Level 1 | Level 2 | Level 3 |
| 1 | Cutting speed (m/min): V | 60 | 120 | 150 | 2 | Feed rate (mm/rev): S | 0.15 | 0.25 | 0.50 | 3 | Depth of cut (mm): ap | 0.75 | 1.00 | 1.25 |
|
|