Research Article
A Hybrid Nondominant-Based Genetic Algorithm (NSGA-II) for Multiobjective Optimization to Minimize Vibration Amplitude in the End Milling Process
Table 1
Process parameters and their levels.
| Parameters (input variables) | Notations used | Units | Factorial levels | −2 | −1 | 0 | 1 | 2 |
| Spindle speed | N | rpm | 1500 | 2000 | 2500 | 3000 | 3500 | Rate of feed | | mm/rev | 0.04 | 0.06 | 0.08 | 0.1 | 0.12 | Depth of cut (axial) | | mm | 0.5 | 0.6 | 0.7 | 0.8 | 0.9 | Depth of cut (radial) | | mm | 0.5 | 0.6 | 0.7 | 0.8 | 0.9 | Radial rake angle of tool | γ | Degree | 12 | 15 | 18 | 21 | 24 |
|
|