Bulent Ulug, John M. Robertson, Peter J. S. Ewen, "The Influence of Conductor Particle Size Distribution on the Blending Curve of Epoxy-Based Thick Film Resistors", Active and Passive Electronic Components, vol. 10, Article ID 520185, 8 pages, 1983. https://doi.org/10.1155/APEC.10.277
The Influence of Conductor Particle Size Distribution on the Blending Curve of Epoxy-Based Thick Film Resistors
The influence of conductor particle size distribution on the blending curve of epoxy-based thick film resistors has been investigated. It was found that the critical volume fraction shifts to higher values as the spread of the conductor particle size distribution decreases. The results are interpreted in terms of a model whose main parameter is the contact probability for the conductor particles.
Copyright © 1983 Hindawi Publishing Corporation. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.