Table of Contents Author Guidelines Submit a Manuscript
ElectroComponent Science and Technology
Volume 10, Issue 4, Pages 255-260
http://dx.doi.org/10.1155/APEC.10.255

Thick Film Fail-Safe Resistors

Research and Development Centre of Hybrid Microelectronics and Resistors Unitra-Telpod, Cracow, Poland

Received 5 June 1981; Accepted 26 June 1982

Copyright © 1983 Hindawi Publishing Corporation. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract

The investigations of low resistance thick film fail-safe resistors are presented. Particularly the shape of a resistive path; the temperature of the central part of the resistor while increasing the power up to 4 Watts; the kind of composition material for the resistive path vs. extensometer effect, and the stability of the resistor are discussed.