Table of Contents Author Guidelines Submit a Manuscript
Advances in Tribology
Volume 2012, Article ID 476028, 8 pages
http://dx.doi.org/10.1155/2012/476028
Research Article

Tribological Properties of Metal V-Belt Type CVT Lubricant

Lubricants Research Laboratory, Idemitsu Kosan Co., Ltd., 24-4 Anesakikaigan, Chiba, Ichihara-shi 299-0107, Japan

Received 26 July 2012; Accepted 11 September 2012

Academic Editor: Philippe Velex

Copyright © 2012 Keiichi Narita. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. Japan Automobile Dealers Association, Annual Report of the Number of New Cars Registered, 31st edition, 2008.
  2. H. Mitsui, “Trends and requirements of fluids for metal pushing belt type CVTs,” Journal of the Japanese Society of Tribologists, vol. 45, no. 6, pp. 13–18, 2000. View at Google Scholar
  3. K. Narita and M. Priest, “Metal-metal friction characteristics and the transmission efficiency of a metal V-belt-type continuously variable transmission,” Proceedings of the Institution of Mechanical Engineers, Part J, vol. 221, no. 1, pp. 11–26, 2007. View at Publisher · View at Google Scholar · View at Scopus
  4. T. Ishikawa, Y. Murakami, R. Yauchibara, and A. Sano, “The effect of belt drive CVT fluid on the friction coefficient between metal components,” SAE Paper 972921, 1997. View at Google Scholar
  5. H. Fujita and H. A. Spikes, “The formation of zinc dithiophosphate antiwear films,” Proceedings of the Institution of Mechanical Engineers, Part J, vol. 218, no. 4, pp. 265–277, 2004. View at Publisher · View at Google Scholar · View at Scopus
  6. S. Bec, A. Tonck, J. M. Georges, R. C. Coy, J. C. Bell, and G. W. Roper, “Relationship between mechanical properties and structures of zinc dithiophosphate anti-wear films,” Proceedings of the Royal Society A, vol. 455, no. 1992, pp. 4181–4203, 1999. View at Google Scholar · View at Scopus
  7. Z. Yin, M. Kasrai, M. Fuller, G. M. Bancroft, K. Fyfe, and K. H. Tan, “Application of soft X-ray absorption spectroscopy in chemical characterization of antiwear films generated by ZDDP Part I: the effects of physical parameters,” Wear, vol. 202, no. 2, pp. 172–191, 1997. View at Google Scholar · View at Scopus
  8. J. M. Martin, C. Grossiord, T. L. Mogne, S. Bec, and A. Tonck, “The two-layer structure of Zndtp tribofilms, part I: AES, XPS and XANES analyses,” Tribology International, vol. 34, no. 8, pp. 523–530, 2001. View at Publisher · View at Google Scholar · View at Scopus
  9. M. Muraki and A. Oshima, “Friction-velocity characteristics of oils containing zinc dialkyldithiophosphates and analysis of their tribofilms,” Journal of Japanese Society of Tribologists, vol. 56, no. 8, pp. 523–529, 2011. View at Google Scholar
  10. JASO M358, “Standard test method for metal on metal friction characteristics of belt CVT fluids,” 2005.
  11. J. D. Micklem, D. K. Longmore, and C. R. Burrows, “Modelling of the steel pushing V-belt continuously variable transmission,” Proceedings of the Institution of Mechanical Engineers, Part C, vol. 208, no. 1, pp. 13–27, 1994. View at Google Scholar · View at Scopus
  12. C. Morgan and R. Fewkes, “Development of a belt CVT fluid test performance using the VT20/25E,” SAE Paper 2002-01-2819, 2002. View at Google Scholar
  13. JASO M349, “Road vehicles—test method for anti-shudder performance of automatic transmission fluids,” 1998.
  14. T. Kugimiya, “Effects of additives for ATF on μ-V characteristics,” in Proceedings of International Tribology Conference, vol. 2, pp. 1355–1360, Nagasaki, Japan, 2000.
  15. A. J. Pidduck and G. C. Smith, “Scanning probe microscopy of automotive anti-wear films,” Wear, vol. 212, no. 2, pp. 254–264, 1997. View at Google Scholar · View at Scopus
  16. L. J. Taylor and H. A. Spikes, “Friction-enhancing properties of ZDDP antiwear additive: part I—friction and morphology of ZDDP reaction films,” Tribology Transactions, vol. 46, no. 3, pp. 303–309, 2003. View at Google Scholar · View at Scopus