Table of Contents Author Guidelines Submit a Manuscript
Advances in Tribology
Volume 2012 (2012), Article ID 616923, 10 pages
Research Article

CFD Simulations of Splash Losses of a Gearbox

1Dipartimento di Meccanica, Politecnico di Milano, Via la Masa 1, 20156 Milano, Italy
2Lehrstuhl für Maschinenelemente, FZG, 85748 Garching bei München, Germany

Received 1 June 2012; Accepted 26 June 2012

Academic Editor: Philippe Velex

Copyright © 2012 Carlo Gorla et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. G. Niemann and H. Winter, Maschinenelemente Band II—Getriebe Allgemein, Zahnradgetriebe—Grundlagen, Stirnradgetriebe, Springer, New York, NY, USA, 1983.
  2. W. Mauz, HydrauliSche VerluSte Von Stirnradgetrieben Bei Umfangsgeschwindigkeiten BiS 60 M/S, Bericht des Institutes für Maschinenkonstruktion und Getriebebau Nr. 159, Universität Stuttgart, 1987.
  3. P. H. Dawson, “Windage loss in larger high-speed gears,” Proceedings of the Institution of Mechanical Engineers, vol. 198, no. 1, pp. 51–59, 1984. View at Google Scholar · View at Scopus
  4. Y. Marchesse, C. Changenet, F. Ville, and P. Velex, “Investigations on CFD simulations for predicting windage power losses in spur gears,” Journal of Mechanical Design, vol. 133, no. 2, Article ID 024501, 7 pages, 2011. View at Publisher · View at Google Scholar · View at Scopus
  5. B. R. Hohn, K. Michaelis, and H. P. Otto, “Influence on no-load gear losses,” in Proceedings of the Ecotrib Conference, vol. 2, pp. 639–644, 2011.
  6. F. Concli and C. Gorla, “Influence of lubricant temperature, lubricant level and rotational speed on the churning power losses in an industrial planetary speed reducer: computational and experimental study,” International Journal of Computational Methods and Experimental Measurements, Wessex Institute of Technology. In press.
  7. F. Concli and C. Gorla, Computational and Experimental Analysis of the Churning Power Losses in an Industrial planetary Speed Reducers, Advances in Fluid Mechanics IX, WIT Transactions on Engineering Sciences, Wessex Institute of Technology, 2012.
  8. F. Concli and C. Gorla, “Churning power losses in planetary speed reducer: computational-experimental analysis,” in Proceedings of the EngineSOFT International Conference, 2011.
  9. F. Concli and C. Gorla, “Oil squeezing power losses of a spur gear pair by mean of CFD simulations,” in Proceedings of the Bienall Conference on Engineering Systems Design and Analysis (ESDA '12), 2012.
  10. F. Concli and C. Gorla, Oil Squeezing Power Losses of a Gear Pair: A CFD Analysis, Advances in Fluid Mechanics IX, WIT Transactions on Engineering Sciences, Wessex Institute of Technology, 2012.
  11. H. K. Versteeg and W. Malalasekera, An Introduction to Computational Fluid Dynamics—the Finite Volume Method, Longman Group, London, UK, 1995.
  12. B. E. Launder and D. B. Spalding, “The numerical computation of turbulent flows,” Computer Methods in Applied Mechanics and Engineering, vol. 3, no. 2, pp. 269–289, 1974. View at Google Scholar · View at Scopus
  13. V. Yakhot, S. A. Orszag, S. Thangam, T. B. Gatski, and C. G. Speziale, “Development of turbulence models for shear flows by a double expansion technique,” Physics of Fluids A, vol. 4, no. 7, pp. 1510–1520, 1992. View at Google Scholar · View at Scopus
  14. P. M. Gresho, R. L. Lee, and R. L. Sani, On the Time-Dependent Solution of the Incompressible Navier-Stokes Equations in Two and Three Dimensions, Recent Advances in Numerical Methods in Fluids, Pineridge Press, Swansea, UK, 1980.