Journals
Publish with us
Publishing partnerships
About us
Blog
Advances in Tribology
Journal overview
For authors
For reviewers
For editors
Table of Contents
Special Issues
Advances in Tribology
/
2012
/
Article
/
Fig 9
/
Research Article
Surface Layer Properties after Successive EDM or EDA and Then Superficial Roto-Peen Machining
Figure 9
The image of the metallographic structure of surface layer after the EDA:
U
= 200 (V),
I
= 32 (A), Ti = 3200 (
μ
s) (x 250).