Table of Contents Author Guidelines Submit a Manuscript
Advances in Tribology
Volume 2012, Article ID 926870, 7 pages
http://dx.doi.org/10.1155/2012/926870
Research Article

Surface Chemistry of Aluminium Alloy Slid against Steel Lubricated by Organic Friction Modifier in Hydrocarbon Oil

Department of Chemistry and Bioengineering, Faculty of Engineering, Iwate University, Moriola 020-8551, Japan

Received 26 June 2011; Revised 26 September 2011; Accepted 20 October 2011

Academic Editor: Satish V. Kailas

Copyright © 2012 Ichiro Minami and Ayumi Sugibuchi. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. W. Yong and X. Qunji, “Friction and wear characteristics of p-containing antiwear and extreme pressure additives in the sliding of steel against aluminum alloy,” Wear, vol. 188, no. 1-2, pp. 27–32, 1995. View at Google Scholar · View at Scopus
  2. Y. Wan and Q. Xue, “Effect of phosphorus-containing additives on the wear of aluminum in the lubricated aluminum-on-steel contact,” Tribology Letters, vol. 2, no. 1, pp. 37–45, 1996. View at Google Scholar · View at Scopus
  3. Y. Hu and W. Liu, “Tribological properties of alcohols as lubricating additives for aluminum-on-steel contact,” Wear, vol. 218, no. 2, pp. 244–249, 1998. View at Publisher · View at Google Scholar · View at Scopus
  4. C. Kajdas and W. Liu, “Tribochemistry of aluminium and aluminium alloy systems lubricated with liquids containing alcohol or amine additive types and some other lubricants—a review,” Lubrication Science, vol. 16, no. 3, pp. 267–292, 2004. View at Google Scholar · View at Scopus
  5. M. A. Nicholls, P. R. Norton, G. M. Bancroft, and M. Kasrai, “X-ray absorption spectroscopy of tribofilms produced from zinc dialkyl dithiophosphates on Al-Si alloys,” Wear, vol. 257, no. 3-4, pp. 311–328, 2004. View at Publisher · View at Google Scholar · View at Scopus
  6. A. Neville, A. Morina, T. Haque, and M. Voong, “Compatibility between tribological surfaces and lubricant additives—how friction and wear reduction can be controlled by surface/lube synergies,” Tribology International, vol. 40, no. 10–12, pp. 1680–1695, 2007. View at Publisher · View at Google Scholar · View at Scopus
  7. M. A. Nicholls, P. R. Norton, G. M. Bancroft, M. Kasrai, G. De Stasio, and L. M. Wiese, “Spatially resolved nanoscale chemical and mechanical characterization of ZDDP antiwear films on aluminum-silicon alloys under cylinder/bore wear conditions,” Tribology Letters, vol. 18, no. 3, pp. 261–278, 2005. View at Publisher · View at Google Scholar · View at Scopus
  8. I. Minami, A. Yamazaki, H. Nanao, and S. Mori, “A cylinder and assembled four-block type tribo-test: novel method to study tribo-chemistry of lubricant and material,” Tribology Online, vol. 2, no. 1, pp. 40–43, 2007. View at Google Scholar
  9. R. S. Montgomery, “The effect of alcohols and ethers on the wear behavior of aluminum,” Wear, vol. 8, no. 6, pp. 466–473, 1965. View at Google Scholar · View at Scopus
  10. S. Hironaka and T. Sakurai, “The effect of pentaerythritol partial ester on the wear of aluminum,” Wear, vol. 50, no. 1, pp. 105–114, 1978. View at Google Scholar · View at Scopus
  11. F. Wiltord, J.-M. Martin, T. Le Mogne, F. Jarnias, M. Querry, and P. Vergne, “Reaction mechanisms of alcohols on aluminum surfaces,” Tribologia, vol. 37, no. 6, pp. 7–20, 2006. View at Google Scholar
  12. B. W. Hotten, “Bidentate organic oxygen compounds as boundary lubricants for aluminum,” Lubrication Engineering, vol. 30, no. 8, pp. 398–402, 1974. View at Google Scholar · View at Scopus
  13. Y. Wan, W. Liu, and Q. Xue, “Effects of diol compounds on the friction and wear of aluminum alloy in a lubricated aluminum-on-steel contact,” Wear, vol. 193, no. 1, pp. 99–104, 1996. View at Publisher · View at Google Scholar · View at Scopus
  14. S. Igari, S. Mori, and Y. Takikawa, “Effects of molecular structure of aliphatic diols and polyalkylene glycol as lubricants on the wear of aluminum,” Wear, vol. 244, no. 1-2, pp. 180–184, 2000. View at Publisher · View at Google Scholar · View at Scopus
  15. F. A. Davis and T. S. Eyre, “The effect of silicon content and morphology on the wear of aluminium-silicon alloys under dry and lubricated sliding conditions,” Tribology International, vol. 27, no. 3, pp. 171–181, 1994. View at Google Scholar · View at Scopus
  16. J. F. Watts and J. Wolstenholme, An Introduction to Surface Analysis by XPS and AES, John Wiley and Sons, 2003.
  17. J. R. Rydberg, “Hardness of elementary substances,” Zeitschrift fuer Physikalische Chemie Stoechiometrie und Verwandtschaftslehre, vol. 33, pp. 353–359, 1900. View at Google Scholar