Table of Contents Author Guidelines Submit a Manuscript
Advances in Tribology
Volume 2014, Article ID 476175, 8 pages
http://dx.doi.org/10.1155/2014/476175
Research Article

Jet-Impingement Effects of Alumina-Nanofluid on Aluminum and Copper

Department of Mechanical Engineering, Georgia Southern University, Statesboro, GA 30458-8046, USA

Received 29 May 2014; Accepted 5 August 2014; Published 21 August 2014

Academic Editor: Meng Hua

Copyright © 2014 Gustavo J. Molina et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. U. S. Choi and J. A. Eastman, “Enhancing thermal conductivity of fluids with nanoparticles,” in Proceedings of the International Mechanical Engineering Congress and Exhibition, Report no.: ANL/MSD/CP-84938, CONF-951135-29, ON: DE96004174, TRN: 96:001707, San Francisco, Calif, USA, November 1995.
  2. S. U. S. Choi, Development and Applications of Non-Newtonian Flows, edited by D. A. Siginer and H. P. Wang, ASME Publisher, 1995.
  3. A. K. Singh, “Thermal conductivity of nanofluids,” Defence Science Journal, vol. 58, no. 5, pp. 600–607, 2008. View at Publisher · View at Google Scholar · View at Scopus
  4. J. Buongiorno, “Convective transport in nanofluids,” Journal of Heat Transfer, vol. 128, no. 3, pp. 240–250, 2006. View at Publisher · View at Google Scholar · View at Scopus
  5. K. V. Wong and O. De Leon, “Applications of nanofluids: current and future,” Advances in Mechanical Engineering, vol. 2010, Article ID 519659, 11 pages, 2010. View at Publisher · View at Google Scholar
  6. R. Taylor, S. Coulombe, T. Otanicar et al., “Small particles, big impacts: a review of the diverse applications of nanofluids,” Journal of Applied Physics, vol. 113, no. 1, Article ID 011301, 2013. View at Publisher · View at Google Scholar · View at Scopus
  7. J. A. Eastman, S. U. S. Choi, S. Li, W. Yu, and L. J. Thompson, “Anomalously increased effective thermal conductivities of ethylene glycol-based nanofluids containing copper nanoparticles,” Applied Physics Letters, vol. 78, no. 6, pp. 718–720, 2001. View at Publisher · View at Google Scholar · View at Scopus
  8. B. C. Pak and Y. I. Cho, “Hydrodynamic and heat transfer study of dispersed fluids with submicron metallic oxide particles,” Experimental Heat Transfer, vol. 11, no. 2, pp. 151–170, 1998. View at Publisher · View at Google Scholar · View at Scopus
  9. P. E. Phelan, P. Bhattacharya, and R. S. Prasher, “Nanofluids for heat transfer applications,” Annual Review of Heat Transfer, vol. 14, pp. 255–275, 2005. View at Google Scholar
  10. S. M. S. Murshed, K. C. Leong, and C. Yang, “Investigations of thermal conductivity and viscosity of nanofluids,” International Journal of Thermal Sciences, vol. 47, no. 5, pp. 560–568, 2008. View at Publisher · View at Google Scholar · View at Scopus
  11. V. Trisaksri and S. Wongwises, “Critical review of heat transfer characteristics of nanofluids,” Renewable and Sustainable Energy Reviews, vol. 11, no. 3, pp. 512–523, 2007. View at Publisher · View at Google Scholar · View at Scopus
  12. H. Xie, J. Wang, T. Xi, Y. Liu, F. Ai, and Q. Wu, “Thermal conductivity enhancement of suspensions containing nanosized alumina particles,” Journal of Applied Physics, vol. 91, no. 7, pp. 4568–4572, 2002. View at Publisher · View at Google Scholar · View at Scopus
  13. R. Prasher, P. E. Phelan, and P. Bhattacharya, “Effect of aggregation kinetics on the thermal conductivity of nanoscale colloidal solutions (nanofluid),” Nano Letters, vol. 6, no. 7, pp. 1529–1534, 2006. View at Publisher · View at Google Scholar · View at Scopus
  14. R. Prasher, D. Song, J. Wang, and P. Phelan, “Measurement of nanofluid viscosity and its implications for thermal applications,” Applied Physics Letters, vol. 89, no. 13, Article ID 133108, 2006. View at Publisher · View at Google Scholar
  15. J. Chevalier, O. Tillement, and F. Ayela, “Structure and rheology of SiO2 nanoparticle suspensions under very high shear rates,” Physical Review E, vol. 80, no. 5, Article ID 051403, 2009. View at Publisher · View at Google Scholar · View at Scopus
  16. A. J. Schmidt, M. Chiesa, D. H. Torchinsky et al., “Experimental investigation of nanofluid shear and longitudinal viscosities,” Applied Physics Letters, vol. 92, no. 24, Article ID 244107, 2008. View at Publisher · View at Google Scholar · View at Scopus
  17. P. Ding and A. W. Pacek, “Effect of pH on deagglomeration and rheology/morphology of aqueous suspensions of goethite nanopowder,” Journal of Colloid and Interface Science, vol. 325, no. 1, pp. 165–172, 2008. View at Publisher · View at Google Scholar · View at Scopus
  18. S. K. Das, S. U. S. Choi, and H. E. Patel, “Heat transfer in nanofluids—a review,” Heat Transfer Engineering, vol. 27, no. 10, pp. 3–19, 2006. View at Publisher · View at Google Scholar · View at Scopus
  19. K. Y. Leong, R. Saidur, S. N. Kazi, and A. H. Mamun, “Performance investigation of an automotive car radiator operated with nanofluid-based coolants (nanofluid as a coolant in a radiator),” Applied Thermal Engineering, vol. 30, no. 17-18, pp. 2685–2692, 2010. View at Publisher · View at Google Scholar · View at Scopus
  20. S. M. Peyghambarzadeh, S. H. Hashemabadi, M. S. Jamnani, and S. M. Hoseini, “Improving the cooling performance of automobile radiator with Al2O3/water nanofluid,” Applied Thermal Engineering, vol. 31, no. 10, pp. 1833–1838, 2011. View at Publisher · View at Google Scholar · View at Scopus
  21. S. M. Peyghambarzadeh, S. H. Hashemabadi, M. Naraki, and Y. Vermahmoudi, “Experimental study of overall heat transfer coefficient in the application of dilute nanofluids in the car radiator,” Applied Thermal Engineering, vol. 52, no. 1, pp. 8–16, 2013. View at Publisher · View at Google Scholar · View at Scopus
  22. S. K. Saripella, W. Yu, J. Routbort, D. France, and U. Rizwan, “Effects of nanofluid coolant in a class 8 truck engine,” SAE Technical Paper 2007-01-2141, 2007. View at Google Scholar
  23. J. L. Routbort and D. Singh, FY 2008 Annual Progress Report for Advanced Vehicle Technology Analysis and Evaluation Activities and Heavy Vehicle Systems Optimization Program, U.S. Department of Energy, AVTAE Activities and HVSO Program, USA, 2008.
  24. D. Singh, Erosion of Radiator Materials by Nanofluids, Vehicle Technologies–Annual Review, U.S. Department of Energy, Argonne National Laboratory, 2009.
  25. C. T. Nguyen, G. Laplante, M. Cury, and G. Simon, “Experimental investigation of impinging jet heat transfer and erosion effect using Al2O3-water nanofluid,” in Proceedings of the 6th IASME/WSEAS International Conference on Fluid Mechanics and Aerodynamics (FMA '08), Rhodes, Greece, August 2008.
  26. G. P. Celata, F. D’Annibale, and A. Mariani, “Nanofluid flow effects on metal surfaces,” Energia, Ambiente e Innovazione, no. 4-5, pp. 94–98, 2011. View at Google Scholar
  27. G. P. Celata, F. D'Annibale, A. Mariani et al., “Experimental results of nanofluids flow effects on metal surfaces,” Chemical Engineering Research and Design, 2013. View at Publisher · View at Google Scholar
  28. G. George, R. K. Sabareesh, S. Thomas et al., “Experimental investigation of material surface erosion caused by TiO2 nanofluid impingement,” Journal of Nanofluids, vol. 3, pp. 1–11, 2014. View at Google Scholar
  29. G. J. Molina, M. Hulett, V. Soloiu, and M. Rahman, “Erosion effects of nanofluids on selected cooling-system materials,” in Proceedings of the 3rd International Symposium on Tribo-Corrosion, P. J. Blau, F. E. Schmidt, D. Drees, and J.-P. Celis, Eds., vol. 1563 of ASTM STP, pp. 47–65, ASTM International, West Conshohocken, Pa, USA, 2012.
  30. G. J. Molina, V. Soloiu, and M. Rahman, “On the surface effects of nanofluids in cooling-system materials,” in Proceedings of the Materials Research Society Spring Meeting, vol. 1558 of MRS Online Proceedings Library, Cambridge University Press, San Francisco, Calif, USA, April 2013.
  31. MSDS503, “Custom Brand Antifreeze/coolant,” Material Data Safety Sheet, 2008, http://msds.walmartstores.com/client/document?productid=5f456c08-9657-4abf-afb2-6926434ce2e7&action=MSDS&subformat=NAM. View at Google Scholar
  32. “Surface Roughness Measuring Tester Surftest SJ-210 User’s Manual,” No. 99MB122A, Series No.178, Mitutoyo Corp., Japan.
  33. P. A. Engel, Impact Wear of Materials, Elsevier, New York, NY, USA, 1976.
  34. I. M. Hutchings, “Mechanisms of the erosion of metals by solid particles,” in Proceedings of the ASTM Symposium on Erosion: Prevention and Its Useful Applications, W. Alder, Ed., ASTM STP 664, pp. 59–76, ASTM International, West Conshohocken, Pa, USA, 1979. View at Publisher · View at Google Scholar
  35. I. M. Hutchings, “A model for the erosion of metals by spherical particles at normal incidence,” Wear, vol. 70, no. 3, pp. 269–281, 1981. View at Publisher · View at Google Scholar · View at Scopus
  36. A. K. Cousens and I. M. Hutchings, “A critical study of the erosion of an aluminium alloy by solid spherical particles at normal impingement,” Wear, vol. 88, no. 3, pp. 335–348, 1983. View at Publisher · View at Google Scholar · View at Scopus
  37. W. A. Brainard and J. Salik, “Scanning-electron-microscope study of normal-impingement erosion of ductile metals,” NASA Technical Paper 1609, National Aeronautics and Space Administration Scientific and Technical, Information Office, Lewis Research Center, Cleveland, Ohio, USA, 1980. View at Google Scholar
  38. P. Veerabhadra Rao and D. H. Buckley, “Time dependence of solid-particle impingement erosion of an aluminum alloy,” NASA Technical Paper 2169, National Aeronautics and Space Administration Scientific and Technical Information Branch, Lewis Research Center, Cleveland, Ohio, USA, 1983. View at Google Scholar
  39. R. S. Lynn, K. K. Wong, and H. M. Clark, “On the particle size effect in slurry erosion,” Wear, vol. 149, no. 1-2, pp. 55–71, 1991. View at Publisher · View at Google Scholar · View at Scopus
  40. L. Fuyan and S. Hesheng, “The effect of impingement angle on slurry erosion,” Wear, vol. 141, no. 2, pp. 279–289, 1991. View at Publisher · View at Google Scholar · View at Scopus
  41. S. A. Angayarkanni and J. Philip, “Role of adsorbing moieties on thermal conductivity and associated properties of nanofluids,” Journal of Physical Chemistry C, vol. 117, no. 17, pp. 9009–9019, 2013. View at Publisher · View at Google Scholar · View at Scopus