Research Article
A New Design of the Universal Test Rig to Measure the Wear Characterizations of Polymer Acetal Gears (Spur, Helical, Bevel, and Worm)
Table 4
Worm and wheel gear specifications.
| Parameters | Value |
| Module | 3.15 mm | Number of teeth (worm/wheel) | 2/28 | Normal pressure angle | 20° | Pitch diameter (worm/wheel) | 32/90 mm | Face width (worm/wheel) | 40/29 mm | Axial pitch | 10 mm | Centre distance | 61 mm |
|
|