Research Article
Extruded and Injection Moulded Virgin PA 6/6 as Abrasion Resistant Material
Table 1
Mechanical properties of injection moulded and extruded material specimens.
| Mechanical characteristics | Standard | Units | Injection moulded | Extruded |
| Tensile strength | EN ISO 527-2 | MPa | 69 | 83 | Elongation at break | EN ISO 527-2 | % | 62 | 16 | Tensile modulus | EN ISO 527-2 | MPa | 2050 | 2900 | Charpy impact hardness | ISO 179-A | kJ/m2 | 49 | 20 | Hardness | ASTM D2240 | Shore D | 78.4 | 81 |
|
|